Author Topic: Mk6 reverse camera issue (Read 2579 times)

fab5freddy · « **on:** January 07, 2013, 10:56:27 am »

Have an intermittent problem with the boot badge.

I'd say 1 out of every 5 times the boot badge doesn't close properly.

The camera closes and pulls in ok but the mechanism doesn't close and is left a jar.

Anyone else had this issue and know of a fix?

fab5freddy · « **Reply #1 on:** January 07, 2013, 07:16:52 pm »

Anyone?

Eddie-NL · « **Reply #2 on:** January 08, 2013, 02:24:12 pm »

where did you get it from?
who fitted it?

fab5freddy · « **Reply #3 on:** January 08, 2013, 03:25:50 pm »

I bought it off DonalM, he got it from SteveP a few months back.

I did the fitting, using Steve's how to.

Worked perfect for the first couple of months, now is sticking open

You come across this before?

Funny enough I saw a passat today in the car park with the same issue, badge a jar, wondering if this common enough problem?

fab5freddy · « **Reply #4 on:** January 08, 2013, 08:37:09 pm »

Any ideas anyone?

SI-R32 · « **Reply #5 on:** January 08, 2013, 08:47:36 pm »

take the unit apart and test just the mechanism over and over, make sure its all greased up and make sure nothing is broken or damaged

this isn't a how to but there are some pics on here that may help you

http://www.r32oc.com/topic/39043-broken-reverse-camera/

SI-R32 · « **Reply #6 on:** January 08, 2013, 08:52:45 pm »

take the unit apart and test just the mechanism over and over, make sure its all greased up and make sure nothing is broken or damaged

this isn't a how to but there are some pics on here that may help you

http://www.r32oc.com/topic/39043-broken-reverse-camera/

fab5freddy · « **Reply #7 on:** January 08, 2013, 10:22:33 pm »

Thanks for that SI-R32, what grease would you recommend using?

fab5freddy · « **Reply #8 on:** January 28, 2013, 09:51:52 am »

Well thought I'd update this and wouldn't you know since first posting this problem not once has it happened

Happy days, just hope I haven't jinked myself now

doylebros · « **Reply #9 on:** January 29, 2013, 05:29:00 pm »

Could it of been an issue with the current minus temperatures - ice - and locks don't mix to well!

fab5freddy · « **Reply #10 on:** January 30, 2013, 10:44:35 pm »

No ice here in the very south of Ireland

, barely dropped below 7 degrees for more than a couple of days.

Got a feeling it was the piggyback fuse holder, it was fully pushed in but gave it a little wiggle for good measure and hey ho

Author Topic: Mk6 reverse camera issue (Read 2579 times)

fab5freddy

Mk6 reverse camera issue

fab5freddy

Re: Mk6 reverse camera issue

Eddie-NL

Re: Mk6 reverse camera issue

fab5freddy

Re: Mk6 reverse camera issue

fab5freddy

Re: Mk6 reverse camera issue

SI-R32

Re: Mk6 reverse camera issue

SI-R32

Re: Mk6 reverse camera issue

fab5freddy

Re: Mk6 reverse camera issue

fab5freddy

Re: Mk6 reverse camera issue

doylebros

Re: Mk6 reverse camera issue

fab5freddy

Re: Mk6 reverse camera issue