Hi all new to here
Right here we go I've bought an edition 30 which was completely standard and have ripped it to pieces and slowly building it back together again the reason for this was I bought it with a cracked sump as some jack ass decided to jack the sump to change the timing belt then didn't realise they had cracked it and it leaked out and spun the mains :/
Now I have been going to town with this but have heard a couple of things of which I was hoping some peeps on here might shed some light
I have done the following so far
ACL racing Bearings
New mains
New thrust washers
Cleaned pump
New head gasket
New genuine timing belt and water pump
New cam chain and tensioner
New fsi bucket
Rs4 high pressure pump
Rs4 injectors
Hybrid turbo
Lsd helicular diff
Red coils
Forge twintake
Forge twintercooler
Forge turbo actuator
Forge blow off
These are the mods to engine and running so far
I wanted to know if anyone knew if the rs4 injectors or standard ones are better and also which remap/rolling road set up would be better given the shopping list I have done
Any and all comments would be greatly appreciated
Thanks Andy
