Hi all, need a quick bit of guidance if poss HELP

[Lippy]

Ive had my white golf gti for 3 weeks and managed to do small amounts of damage to the rear bumper.
Heres my problem.

To keep her mint I need to replace the rear bumper upper part (now want a replacement with parking sensor holes)
I would like the ED30 bottom part but need the gti exhaust cut out, how do you get the gti cut out in the ed30 bumper?

Looking at buying something like this http://www.ebay.co.uk/itm/VW-GOLF-MK5-GTI-PIRELLI-2005-2009-REAR-BUMPER-IN-GREY-WITH-DIFFUSIOR-V27/271942537984?_trksid=p2047675.c100009.m1982&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D32956%26meid%3D6b3acacceab247db9ba48c31ae65f70a%26pid%3D100009%26rk%3D4%26rkt%3D10%26sd%3D400826761611

This one here seems to have a cut out as standard :/ any idea how this is achieved?

Also for parking sensors I was thinking on laserline 4012F unless anyone else has any other suggestions?

[Washout]

Not sure what your asking matey the edition 30 bumper is the same as the gti one with the positioning of the exhaust cut out. There are some very minor differences. See here.

http://www.awesomegti.com/original-vw-mk5-gti-anniversary-edition-30-rear-valance

[Lippy]

Hey Washout,
Thanks for the reply, if you look at the link I posted 3 out of 4 of the ED30 rear bumpers on Ebay dont have a cut out at all and the reason I need one is because I have the Miltek twin exit exhausts.
I have seen the differences in the bumpers and the main one for me is the rear bumper isnt rounded on the ED30 like the GTI or standard bumper it drops to the floor and the bottom turns inwards sharply (hope that makes sense)
Ben