Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: H&R 28mm/24mm anti roll bar kit  (Read 1560 times)

Offline Burbs22

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 6
  • Posts: 86
    • Email
H&R 28mm/24mm anti roll bar kit
« on: August 24, 2015, 03:17:09 pm »
I'm looking to get this kit for my pirelli edition but I have xenons and some of the smaller kits you have to choose whether you have xenons or not.
Can anybody confirm these will 100% fit my car with xenons?
« Last Edit: August 24, 2015, 10:57:25 pm by Burbs22 »
Logged

Offline fab5freddy

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 238
  • -Receive: 239
  • Posts: 2033
Re: H&R 28mm/26mm anti roll bar kit
« Reply #1 on: August 24, 2015, 07:40:44 pm »
Not sure this will help really, but I had the H&R 28/24 arb's (non xenon) fit to my gti before I retro fitted xenons and I have had no issues. I think it's to do with clearance of the level sensors......
Logged

Offline Burbs22

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 6
  • Posts: 86
    • Email
Re: H&R 28mm/24mm anti roll bar kit
« Reply #2 on: August 24, 2015, 10:58:45 pm »
Thanks, that's what I'm worried about I don't want to spend loads and find they don't fit because that will be very annoying.
Has anyone else had any experience?
Logged

Offline ROH ECHT

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 113
  • -Receive: 149
  • Posts: 2116
  • K04 PLAY....ZOOM DIS!
Re: H&R 28mm/24mm anti roll bar kit
« Reply #3 on: August 25, 2015, 07:18:35 am »
I'm in the US and have bi-xenon lamps. I have H&R's 26mm front arb and a 24mm rear arb. Haven't had any issues regarding leveling or lamp issues. Not sure if this helps, but wanted to just say this. I have had to re-level the aim through vcds, but cannot recall the events around the time of needing to do that.
Logged
K04 PLAY...K04 turbo/S3 INJ. & FMIC/FORGE FMTC, TB hose, & WG actuator/GIAC's H.O. K04 & DSG TUNES/AWE DV/NEUSPEED P-FLO,TURBO OUTLET & TB pipe/AUTOTECH hpfp/BSH Eng.&Trans Mounts/H&R ARB's/Whiteline Performance springs & W.A.L.K./ECS stage-3 BBK/BILSTEIN B8's...ZOOM'DIS...GIAC K04 tune-2007 Volkswagen GTI: 12.823 @ 112.050 MPH__Voting for my Dragtimes link: http://www.dragtimes.com/Volkswagen-GTI-Timeslip-25700.html?r=1

Offline Shoduchi

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 220
  • -Receive: 429
  • Posts: 4173
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,95592.msg952042.html
Re: H&R 28mm/24mm anti roll bar kit
« Reply #4 on: August 25, 2015, 07:43:25 am »
Quote from: ROH ECHT on August 25, 2015, 07:18:35 am
I'm in the US and have bi-xenon lamps. I have H&R's 26mm front arb and a 24mm rear arb. Haven't had any issues regarding leveling or lamp issues. Not sure if this helps, but wanted to just say this. I have had to re-level the aim through vcds, but cannot recall the events around the time of needing to do that.
It doesn't help because the RARB doesn't affect the leveling sensor, just the front. I also have the same FARB as you and xenons with no issues. I'm also curious to know if the 28 mm FARB is compatible or not.
Logged

Offline GTI-Ross

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 5
  • -Receive: 26
  • Posts: 1057
  • Learning All The Time :)
    • Email
Re: H&R 28mm/24mm anti roll bar kit
« Reply #5 on: August 25, 2015, 09:55:39 am »
Quote from: Burbs22 on August 24, 2015, 03:17:09 pm
I'm looking to get this kit for my pirelli edition but I have xenons and some of the smaller kits you have to choose whether you have xenons or not.
Can anybody confirm these will 100% fit my car with xenons?

I know you said you were looking to buy the set, but I do have the 28mm up for sale in Car Parts if you are interested. The rear usually come up for sale quite regularly to match it.

 
Logged
MK6 GTI CSG | Revo Stage 2 | Revo Stage 2 Intake | VWR SubFrame Mount | VibraTechnics Upper Engine Mount | VibraTechnic Transmission Mount | SuperPro Anti Lift Kit | H&R ARB's | Bilstein B12 | TT Short Shifter |Mintex M1144 Race Pads | HEL Braided Lines |

MK5 GTI - DSG + Extras (Sold because DSG was Soooo Boring !!!)

Offline vRSAlex

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 253
  • Posts: 2761
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,19941.0.html
Re: H&R 28mm/24mm anti roll bar kit
« Reply #6 on: August 25, 2015, 12:05:36 pm »
28/24 bars fit Xenon and non Xenon.
Logged
www.akstuning.co.uk - info@akstuning.com - 01234 822324
Follow AKS tuning on Facebook

Offline Burbs22

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 6
  • Posts: 86
    • Email
Re: H&R 28mm/24mm anti roll bar kit
« Reply #7 on: August 25, 2015, 01:31:14 pm »
Quote from: GTI-Ross on August 25, 2015, 09:55:39 am
Quote from: Burbs22 on August 24, 2015, 03:17:09 pm
I'm looking to get this kit for my pirelli edition but I have xenons and some of the smaller kits you have to choose whether you have xenons or not.
Can anybody confirm these will 100% fit my car with xenons?

I know you said you were looking to buy the set, but I do have the 28mm up for sale in Car Parts if you are interested. The rear usually come up for sale quite regularly to match it.

 

Thanks ross but I am looking to get the complete set as you can't buy bars individually and I have found them on Germany ebay for £300 delivered so will probably go with that :-).

Thanks alex I'm sure I have asked you before but couldn't remember the answer and didn't want to bother you as your so busy :-)
Logged
Pages: [1]   Go Up
« previous next »