PCV delete

[Dan_FR]

Venturi through the exhaust would be best but is costly and will need some custom fab as there is no off the shelf kit in the UK (that i know of).
 
If you can't have them drawn out, then leaving them to escape with as little restriction as possible is the next best thing. I still believe that 2 x 25mm pipes venting naturally is better than 1 19mm (or less) I.D. opening being drawn out through the TIP (PCV delete with catch can). Most aftermarket PCV deletes have such a small recess for the passing of the crank and cam gases that no amount of syphoning will help

[olethalb]

i haven't seen your setup Dan, a year or so ago i had the crank venting 19mm hose under car then had bsh delete using the port that was supposed to connect to crank venting cam cover gasses via 19mm under car.

[neiller]

Will venting to atmosphere pass mot ?

Sent from my SM-N9005 using Tapatalk

[scopes]

Dan, Did you just use longer hoses for the r-tech pcv delete kit or the ones that came with the kit ?

[Chris92]

Il be looking at this Soon, going to clean intake valve then look at a delete to stop them clogging up again. Where are you guys seeing the r tech one? I can't see it on the site.

[olethalb]

it won't stop it, just slows it down