Make a donation

Author Topic: Going to order a PCV replacement....but...  (Read 4210 times)

Offline ROH ECHT

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 113
  • -Receive: 149
  • Posts: 2116
  • K04 PLAY....ZOOM DIS!
Re: Going to order a PCV replacement....but...
« Reply #15 on: April 04, 2016, 12:53:29 am »
I have just read that if one replaces the PCV with the latest revision, that is 06F129101P, you must replace the rear breather pipe as well. 06F129101P replaces 06F129101G & 06F129101E.
K04 PLAY...K04 turbo/S3 INJ. & FMIC/FORGE FMTC, TB hose, & WG actuator/GIAC's H.O. K04 & DSG TUNES/AWE DV/NEUSPEED P-FLO,TURBO OUTLET & TB pipe/AUTOTECH hpfp/BSH Eng.&Trans Mounts/H&R ARB's/Whiteline Performance springs & W.A.L.K./ECS stage-3 BBK/BILSTEIN B8's...ZOOM'DIS...GIAC K04 tune-2007 Volkswagen GTI: 12.823 @ 112.050 MPH__Voting for my Dragtimes link: http://www.dragtimes.com/Volkswagen-GTI-Timeslip-25700.html?r=1

Offline Gmac

  • Always Involved
  • ****
  • Thank You
  • -Given: 30
  • -Receive: 7
  • Posts: 213
Re: Going to order a PCV replacement....but...
« Reply #16 on: April 04, 2016, 05:25:42 am »
I have just read that if one replaces the PCV with the latest revision, that is 06F129101P, you must replace the rear breather pipe as well. 06F129101P replaces 06F129101G & 06F129101E.

From what I've read depending on your VIN, then you were given P or N by the dealer, (N was for early cars) but these have both been replaced by R.  But I can't find info about whether or not the check valve is required when going with the R.  I believe you didn't need to if you replaced with the N.


Offline Dan_FR

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 132
  • -Receive: 189
  • Posts: 1845
  • wait...what?
    • Email
Re: Going to order a PCV replacement....but...
« Reply #17 on: April 04, 2016, 07:33:07 am »
Check valve is not required with the latest R revision, as was not needed for the N. Only the P needed it.
TFSI... Revo Stage 2+... . WMI.... VCDS HEX + CAN, MPPS, VAG Commander & VAG tacho - South Wales

Offline ROH ECHT

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 113
  • -Receive: 149
  • Posts: 2116
  • K04 PLAY....ZOOM DIS!
Re: Going to order a PCV replacement....but...
« Reply #18 on: April 04, 2016, 09:27:04 pm »
I too have only found that you need to install the latest version-rear breather, with that check valve, if you install the P-version PCV. 
K04 PLAY...K04 turbo/S3 INJ. & FMIC/FORGE FMTC, TB hose, & WG actuator/GIAC's H.O. K04 & DSG TUNES/AWE DV/NEUSPEED P-FLO,TURBO OUTLET & TB pipe/AUTOTECH hpfp/BSH Eng.&Trans Mounts/H&R ARB's/Whiteline Performance springs & W.A.L.K./ECS stage-3 BBK/BILSTEIN B8's...ZOOM'DIS...GIAC K04 tune-2007 Volkswagen GTI: 12.823 @ 112.050 MPH__Voting for my Dragtimes link: http://www.dragtimes.com/Volkswagen-GTI-Timeslip-25700.html?r=1

Offline mra12345

  • Taking part
  • ***
  • Thank You
  • -Given: 3
  • -Receive: 1
  • Posts: 43
Re: Going to order a PCV replacement....but...
« Reply #19 on: April 05, 2016, 08:41:39 pm »
So to confirm guys do I replace with 06F129101P or 06F 129 101 R? Looking to confirm before getting my 06 plate booked in for a few jobs.

Thanks!

Offline fab5freddy

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 238
  • -Receive: 239
  • Posts: 2033
Re: Going to order a PCV replacement....but...
« Reply #20 on: April 05, 2016, 08:47:57 pm »
Get the latest "R" revision