Make a donation

Author Topic: rear suspension springs removal  (Read 2009 times)

Offline jimmy-s3

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 1
  • -Receive: 7
  • Posts: 534
    • Email
rear suspension springs removal
« on: December 26, 2009, 04:32:01 pm »
Im changing my rear suspension  and im looking for advice on removing the rear springs? The shocks were easy but not 100% sure on the technique on removing these??
Thanks in advance!

Offline Pesky jones

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 19
  • Posts: 1639
Re: rear suspension springs removal
« Reply #1 on: February 21, 2016, 08:02:33 pm »
Sorry for bringing this up but wondering how people have done this, my haynes manual tell me to put spring compressor on and just compress till it comes out, but my compressors are supposed to be used in pairs opposite to each other and mine wont fit both on.

Pelican guide says disconnect one bolt and lower the.wishbone with a jack. However, the bolt seems to half.way between a 17mm and an 18?!

Offline Andy

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 443
  • Posts: 10929
    • Email
Re: rear suspension springs removal
« Reply #2 on: February 21, 2016, 08:11:32 pm »
I take the bolt out and lower the arm down

Offline Pesky jones

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 19
  • Posts: 1639
Re: rear suspension springs removal
« Reply #3 on: February 21, 2016, 08:25:10 pm »
Yeah seems simpler, do you know what size the bolt head and nut are?

Offline Andy

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 443
  • Posts: 10929
    • Email
Re: rear suspension springs removal
« Reply #4 on: February 21, 2016, 08:32:03 pm »
Think they are 17mm but could be wrong

Offline SI-R32

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 8
  • -Receive: 125
  • Posts: 1001
Re: rear suspension springs removal
« Reply #5 on: February 22, 2016, 12:05:38 am »
just to add a slight bit to this the spring may still be under a bit of tension, so please don't just take the bolt out, use another jack under the arm the spring sits in to compress the spring ever so slightly to make the bolt removal easy then lower the jack off then the spring will easily come out safely.
Loads of extra's and retro fits.

Offline Pesky jones

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 19
  • Posts: 1639
Re: rear suspension springs removal
« Reply #6 on: February 22, 2016, 12:23:36 am »
just to add a slight bit to this the spring may still be under a bit of tension, so please don't just take the bolt out, use another jack under the arm the spring sits in to compress the spring ever so slightly to make the bolt removal easy then lower the jack off then the spring will easily come out safely.

Thanks si, I had intended to do so, just forgot to mention that in the process.