Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: lumpy on cold start?  (Read 1716 times)

Offline njdudsbury

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 1
  • Posts: 156
    • Email
lumpy on cold start?
« on: January 19, 2016, 07:33:05 am »
56 plate with 60k on clock. Been fine until this morning. Started up from cold was really lumpy and sound like running on 3 cylinders, knocky from bottom end. Turned off and started again still lumpy but less, then cleared itself and ran fine into work. No difference in power and no hesitation. Going to let it cool down and try at lunch. Any ideas what it could be? Thanks
Logged

Offline Pesky jones

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 19
  • Posts: 1639
Re: lumpy on cold start?
« Reply #1 on: January 19, 2016, 08:52:24 am »
Perhaps as its been getting progressively colder recently (today where I am -6) then it’s just down to that? Like you say just try again – but by lunch time it will be warmer.
Logged

Offline njdudsbury

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 1
  • Posts: 156
    • Email
Re: lumpy on cold start?
« Reply #2 on: January 19, 2016, 10:21:44 am »
Its been colder than that in the past and never done that before. Could it be a dodgy MAF sensor? What are the symptoms?
Logged

Offline Dan_FR

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 132
  • -Receive: 189
  • Posts: 1845
  • wait...what?
    • Email
Re: lumpy on cold start?
« Reply #3 on: January 19, 2016, 10:33:09 am »
First of all, establish if it is a one-off or if it does this every time (going forward)

Could be one of any number of things that caused it
Logged
TFSI... Revo Stage 2+... . WMI.... VCDS HEX + CAN, MPPS, VAG Commander & VAG tacho - South Wales

Offline Ricky123

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 27
  • Posts: 378
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,98436.0.html
Re: lumpy on cold start?
« Reply #4 on: January 27, 2016, 01:46:11 am »
Lumpy on first start after being sat overnight COULD be head gasket as water could slowly leak into a cylinder over night.

Unlikely on a tfsi but worth checking as you never no.

Get it scanned with VCDS if it's happening regularly
Logged
59 red mk6 GTi 5dr
57 mk5 1.9 TDi match
22 a3 s-line competition 45 tfsiE
09 Suzuki GSXR 1000 (road going track sl*g)
Pages: [1]   Go Up
« previous next »