Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Bi-Xenon headlight levelling clip broken  (Read 1267 times)

Offline Mark_DF05

  • Always Involved
  • ****
  • Thank You
  • -Given: 23
  • -Receive: 9
  • Posts: 268
Bi-Xenon headlight levelling clip broken
« on: November 06, 2015, 04:34:24 pm »
I've retrofitted xenon headlights on my car and noticed that the manual levelling clip on one of my lights has broken meaning it can't be adjusted and is loose.

I'm going to take it out and have a look asap as I don't want to be driving around dazzling other drivers but just wondered if anyone else had come across this problem and how difficult it is to fix?
Logged

Offline Mark_DF05

  • Always Involved
  • ****
  • Thank You
  • -Given: 23
  • -Receive: 9
  • Posts: 268
Re: Bi-Xenon headlight levelling clip broken
« Reply #1 on: November 07, 2015, 06:52:19 pm »
I'm guessing nobody else has had this problem then?
Logged

Offline Rossimac

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 78
  • -Receive: 33
  • Posts: 579
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,90767.0.html
Re: Bi-Xenon headlight levelling clip broken
« Reply #2 on: November 07, 2015, 08:43:57 pm »
EDIT: read the post wrong. Not sure on the manual adjustor inside the headlight, sorry.
« Last Edit: November 07, 2015, 08:45:57 pm by Rossimac »
Logged

Offline Mark_DF05

  • Always Involved
  • ****
  • Thank You
  • -Given: 23
  • -Receive: 9
  • Posts: 268
Re: Bi-Xenon headlight levelling clip broken
« Reply #3 on: November 08, 2015, 10:42:27 am »
No worries. After searching online I think the glass needs to come off to be able to access it which isn't ideal.

In wondering if I could buy a depo headlight and transfer the ballast, igniter and bulb over?
Logged

Offline Pashka

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 4
  • -Receive: 33
  • Posts: 624
    • Email
Re: Bi-Xenon headlight levelling clip broken
« Reply #4 on: November 08, 2015, 11:55:36 am »
Quote from: Mark_DF05 on November 08, 2015, 10:42:27 am
No worries. After searching online I think the glass needs to come off to be able to access it which isn't ideal.

In wondering if I could buy a depo headlight and transfer the ballast, igniter and bulb over?
I think there is 2 types of depo lights, one are h7 another is d2s like OEM and if you are ready to buy a new one, I would try to seperate the glass.
Logged
06 1.9 TDI Owner. Retrofits: Bixenons, Drls, Full GT/GTI exterior, RNS510+MDI+Premium Bluetooth+RVC+OPS, Full Fis, MFSW, Cruise control, TPMS, Polar Fis, Boot pop up and more.. :)
Coding, diagnostic and retrofits in Leeds
Pre coded Can Gateways for battery drain issues with RNS510 and similar headunits
Premium Bluetooth modules/kit
RNS510 Service - codes, maps/firmware updates
Latest V8 West EU maps update service for RNS315

Offline Mark_DF05

  • Always Involved
  • ****
  • Thank You
  • -Given: 23
  • -Receive: 9
  • Posts: 268
Re: Bi-Xenon headlight levelling clip broken
« Reply #5 on: November 08, 2015, 04:58:46 pm »
Yeah I suppose it'd be a 10 pin plug on the depo ones too.

What I'm scared of is taking the headlight apart, it breaking and then being stuck without one.

There's someone selling a genuine one nearby without the ballast so maybe I'll get that as a backup
Logged
Pages: [1]   Go Up
« previous next »