Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Which filler for a scuffed bumper?  (Read 2158 times)

Offline AJP

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 392
  • -Receive: 316
  • Posts: 3212
Which filler for a scuffed bumper?
« on: November 09, 2015, 04:55:30 pm »
Evening all.

Picked up an R32 rear bumper ready for a new exhaust, and it's got the odd light gouge and scuff.

I'd like to have a go at prepping it to save on bodyshop labour, hopefully get it to the point where only a minimal amount of finishing is needed by my painter before he sprays it.

So, I just wondered if there's a preferred filler/technique to use? I'd imagine something with a bit of flex in it? I don't want to fanny about doing it wrong for the bodyshop to spend more time reversing my efforts!

And I'm guessing after the filler it's just a case of wet and dry down to around 600?

Anyway, a few pics:


Logged

4ndy

  • Guest
Re: Which filler for a scuffed bumper?
« Reply #1 on: November 09, 2015, 05:09:18 pm »
UPOL for everything :happy2:
Logged

Offline AJP

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 392
  • -Receive: 316
  • Posts: 3212
Re: Which filler for a scuffed bumper?
« Reply #2 on: November 09, 2015, 05:20:00 pm »
Quote from: 4ndy on November 09, 2015, 05:09:18 pm
UPOL for everything :happy2:
Just put that into ebay and it seems there's loads of variations. Anything in particular? Oh, and I might have a go at flatting down the textured exhaust section - would that need a different approach? Cheers
Logged

4ndy

  • Guest
Re: Which filler for a scuffed bumper?
« Reply #3 on: November 09, 2015, 07:11:47 pm »
Not sure how much you need from the pics but this is the right stuff.http://www.ebay.co.uk/itm/U-POL-DAVIDS-ISOPON-P38-EASY-SAND-CAR-BODY-FILLER-60ml-REPAIRS-DENTS-SCRATCHES-/281159738106?hash=item41766d22fa:g:4E0AAMXQxU9R8H~x
 Scotchbrite type pads will be good for the exhaust section.
EDIT  Ill try and find a decent youtube vid to help... EDIT 
« Last Edit: November 09, 2015, 07:23:15 pm by 4ndy »
Logged

Offline AJP

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 392
  • -Receive: 316
  • Posts: 3212
Re: Which filler for a scuffed bumper?
« Reply #4 on: November 09, 2015, 07:28:11 pm »
Quote from: 4ndy on November 09, 2015, 07:11:47 pm
Not sure how much you need from the pics but this is the right stuff.http://www.ebay.co.uk/itm/U-POL-DAVIDS-ISOPON-P38-EASY-SAND-CAR-BODY-FILLER-60ml-REPAIRS-DENTS-SCRATCHES-/281159738106?hash=item41766d22fa:g:4E0AAMXQxU9R8H~x
 Scotchbrite type pads will be good for the exhaust section.
Top man, thanks for that.

Regarding the textured bit, I found this on r32oc:

http://www.r32oc.com/topic/35227-r32-diffuser-done-gloss-black/

Mentions somewhere in the thread that trying to flatten down the dimples before primer actually 'fuzzes up' the plastic and makes the next steps more difficult. Pretty sure my bodyshop guy saim the same thing when he was doing my skirts and GTI rear. Would Scotchbrite pads flatten it without lifting up the plastic too much do you think?

Possibly going to try the approach of clean, primer, filler primer, and build up rather than flatten down. Seems the poster of that r32oc thread had some success there.

Logged

Offline AJP

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 392
  • -Receive: 316
  • Posts: 3212
Re: Which filler for a scuffed bumper?
« Reply #5 on: November 09, 2015, 07:28:59 pm »
Just seen your edit, will give that a watch! Thanks again bud.
Logged
Pages: [1]   Go Up
« previous next »