diverter valve COPY

[pekarGTI]

accidentally ran into this link diverter valve
So I'd like your opinion on what you think about this?
whether this  worth buying or not.

http://www.aliexpress.com/store/product/LZONE-RACING-High-Quality-BOV-T9351-New-Model-Blow-Off-Valve-For-Late-Model-VAG-and/515802_32514770820.html

[Dan_FR]

Its a copy of a DV+  it's not an atmospheric DV or a BOV

It's not a full replacement DV either - still need the OE solenoid. All it will do is leak. Stick with a Rev G

[AJP]

Copy of a dv+ = crap×crap

[rumblytripod]

Wow, the quality of that looks amazing, you can tell from the finish it will give an airtight seal

[pekarGTI]

Today I bought it, I did it out of curiosity to see what it looks like and whether it's worth,I'll put the picture when it arrives at my place.

[Deako]

I've just replaced a DV+ for an OEM item. You simply can't go wrong with the Rev G.

[Flyingscotsman]

I think that this quote from the item description on the website says it all....

"Do moving parts is different from the original factory as a whole, moving piston RUNTEK 710 f will do some broken up into two sections, one is holding/unloading mechanical parts, one is the original electronic "

...a quality part that will last for years from someone who really understands how your car works :-)

[Bignod00]

Copy of a dv+ = crap×crap

[pekarGTI]

Today arrived diverter valve COPY, here is a picture how it looks







If I have time for the weekend, I'll install it in the car out of curiosity to see if it works

[r5gtt]

Today arrived diverter valve COPY, here is a picture how it looks







If I have time for the weekend, I'll install it in the car out of curiosity to see if it works

If it has holes in it then it's a blow off valve and you still reuse the oem divertor valve which fits on top of this.

[pekarGTI]

yes, there are holes here image



because you thought that this should be fitted with oem part?

[r5gtt]

Oh that's not a blow off valve lol Thought it had holes on the housing side like the forge one I've got sitting in the cupboard wasting away   

But also not recommended as it's a cheap replica of the GFB + so would have bought that if anything.

Should have mentioned hope it works out for you and you don't have any boost issue's or leaks with it... Let us know how you get on over the weeks months mate.

M

[pekarGTI]

today installed DV +





impressions, more than satisfied,Old divert valve was not torn eraser, but in cycles up to the red line had a pressure loss, followed by 0.8 bar when it reaches the red line falls to 0.5 bar pressure.

new DV +, there is no loss of pressure :smiley:Now the pressure is always the same 0.8 bar up to the red line

[Shoduchi]

At least it works. Keep us posted on the reliability of the knock off. I preferred to get the genuine item.

My impressions are that the GFB DV+ is a bit better than the Rev G to recover boost and reaches maximum boost a bit faster. I hope it lasts long enough to compensate the higher price that I paid for it.

[pekarGTI]

I will follow a few days whether it will be fine as it is now.
If you start to lose the pressure, I will replace it with the original GFB DV+