What boost are you running at stg2+

[donovan2123]

As above really. Just wanting to see what boost everyone is running.

I have seen some cars I.e revo at 1.5bar and hold that mid range also seen some at 1.2 bar.


When I try a 1.5bar map i get error sometimes which is lower boost limit somthing.

[Hurdy]

I've had Revo and GIAC on my car and both run around 1.5 bar. You may see actual values over this at peak spike around 3500rpm, but not held values.

[bacillus]

As above really. Just wanting to see what boost everyone is running.

I have seen some cars I.e revo at 1.5bar and hold that mid range also seen some at 1.2 bar.


When I try a 1.5bar map i get error sometimes which is lower boost limit somthing.

What turbo are you using?

[Shorty]

Bespoke map on mine, peaks 1.7 bar and holds 1.5 bar.

[vRSAlex]

I'm not really running 2+ exactly, but currently hitting 1.9 bar peak that tails off to 1.5 at 7k now. It's a Revo race file with a hybrid K04.

[donovan2123]

Mine ko3 hitting 1.5bar and hold from around 2200 - 2200- 5000rpm

[donovan2123]

However I have another map which runs around 1.3bar just trying to see what you other ko3 guys are getting.

I mean at 1.5bar I sometimes get a po299 fault code I have changed my dv to both d and g and no difference however I have heard the seals around hoses to intercooler can leak some boost.

[pitsirikas]

Revo Stage 2+.

Peaks at 1.8 bar and holds 1.3 bar.

[DANBOY66]

this is an old thread i know 


what are people running now days any change since 2012 ?

i have been told i am running 1.85 bar 

[PM30S]

Mine runs Revo peaks at 1.7 and holds 1.4 bar

[jacobrownoly]

Revo stage 2+ on my ko3 peaks at 23psi on B9. That's probably too much for a ko3.

Thoughts??

[Dan_FR]

Mine peaks off the clock, maxes out the standard map sensor using B9. Handles it fine