08/01/17
Have been looking at how to make the GTI a little louder without spending shed loads on a cat back or sports cat/ downpipe. Decided to knock out the precat after reading a few threads about it. Pretty straight forward job besides the exhaust clamp nuts being rusted beyond belief. got the angle grinder out in the end and found some new clamps!
Would've been much easier on a lift but managed with the axle stands!
Can't say the car sounds any different what so ever (which I didn't really expect) but defiantly feels like it picks up quicker when you floor it.
I think a cat back might be in order. Can't justify spending £1000 on a TBE just yet as I don't really plan on going beyond a stage 1 anyway.
As we were in the workshop my mate and I also changed the crank angle sensor (i think!) on his GTI. The car wouldn't go above 4000rpm and had a terrible idle. Seemed like a misfire but after changing the coil packs and plugs we found that this sensor was the problem! All back together and working now though!
Also gave mine a long awaited bath today!
The rust on the wings has got worse over winter too despite coating them in loads of wax.
May have to get them sprayed soon!
Oh and I have just payed for my personalised plate!
Undecided if I'll go with pressed plates or the gel ones this time around, any ideas or pictures welcome to help me decide!
Sent from my iPhone using Tapatalk