2.0 FSI HPFP Cam Follower

[An0NyMOUs]

Does this engine have the HPFP  like the TFSI or is it a specific of that engine?

Thanks

Sent from my Nexus 6 using Tapatalk

[slix]

Does this engine have the HPFP  like the TFSI or is it a specific of that engine?

Thanks

Sent from my Nexus 6 using Tapatalk

Yes.

The cam follower on your engine should be checked every 10k or so. I had mine replaced and had a little bit of wear but it's piece of mind to get it done. Only fakes 30 min or so to check or change.

[Pesky jones]

Unless you have the axx engine in which case it could take a little bwcause of the banjo bolt

[An0NyMOUs]

I'm pretty confident it's not an AXX engine as its not a turbo. Thanks for the replies, I'll get off my a**e and actually have a look!

Sent from my Nexus 6 using Tapatalk

[shoaybmakda]

Unless you have the axx engine in which case it could take a little bwcause of the banjo bolt

It is possible to change the cam follower on a AXX engine without taking off the banjo bolt. My banjo bolt was completely cross threaded so loosened the fuel rail bolts and all the other bolts around the HPFP and slowly pulled it out and lifted it up. Do need to be careful but if the banjo bolt does cause alot of problems that is another option 

[rich83]

I'm pretty confident it's not an AXX engine as its not a turbo. Thanks for the replies, I'll get off my a**e and actually have a look!

Sent from my Nexus 6 using Tapatalk

AXX is turbo. 2.0TFSI

[r5gtt]

I'm pretty confident it's not an AXX engine as its not a turbo. Thanks for the replies, I'll get off my a**e and actually have a look!

Sent from my Nexus 6 using Tapatalk

AXX is turbo. 2.0TFSI

rich83, I think the op meant he's car isn't an axx or turbo, not the axx engine itself.