R5GTT'S Cars rapid

[theminty1]

Yes they do. This is for the dipped beam.
http://www.horizonleds.co.uk/5th-gen-4000-lumens/h7-5th-gen-4000-lumens
These are the ones I had looked at but couldn't figure out how to fit. Quite pricy not to fit
If you can have another look when you get the time . Ta

The H7 I fitted only fit one way without a reversible base and a lot cheaper than those  the ones you've linked have two maybe three ears on them if that's what you're asking about?. They're wrong for our cars as both dip and main beam are H7 with one way of fitting.

Oh they are pricey thats why all the questions.
Its how the 12volts connect as the 12volts is part of the quarter turn thingy I keep going on about.
Working backwards, so basically theres the bulb, a wire goes to some kind of Led driver, but the Led driver needs 12volts. Its that connection i am interested in. A photo would be appreciated if you have the time. 

[r5gtt]

Yes they do. This is for the dipped beam.
http://www.horizonleds.co.uk/5th-gen-4000-lumens/h7-5th-gen-4000-lumens
These are the ones I had looked at but couldn't figure out how to fit. Quite pricy not to fit
If you can have another look when you get the time . Ta

The H7 I fitted only fit one way without a reversible base and a lot cheaper than those  the ones you've linked have two maybe three ears on them if that's what you're asking about?. They're wrong for our cars as both dip and main beam are H7 with one way of fitting.

Oh they are pricey thats why all the questions.
Its how the 12volts connect as the 12volts is part of the quarter turn thingy I keep going on about.
Working backwards, so basically theres the bulb, a wire goes to some kind of Led driver, but the Led driver needs 12volts. Its that connection i am interested in. A photo would be appreciated if you have the time. 

my ones cost me £12 the pair off eBay and are straight plug and play into the existing wiring and no additional drivers on these. I see the more pricey ones do and thinking they plug straight into the headlight bulb connection as where else would it go 

[theminty1]

I am not the brightest sorry.......... but in your photo there is the black plug with the male spade connection i just dont know how it connects the the quarter turn thingy. I will need to look at my car again. I must be missing something here. 

[r5gtt]

The connector with the two male spades plug into the connector that usually connect directly to the h7 light bulbs

[theminty1]

I have had a quick snoop on the internet and now see why we are at crossed wires.
My car has original ordinary golf headlight non xenon so it has the quarter turn thingy. This is what holds the bulb in place and provides the power to the bulb. I do not have the stainless wire/clip that normally holds in the bulb so as far as i can figure out it cant be done  Unless of course you have a solution.

[Rigsby]

Boost gauge looks really good.
What gauge is it? And what wire did you splice into for power?

[r5gtt]

I have had a quick snoop on the internet and now see why we are at crossed wires.
My car has original ordinary golf headlight non xenon so it has the quarter turn thingy. This is what holds the bulb in place and provides the power to the bulb. I do not have the stainless wire/clip that normally holds in the bulb so as far as i can figure out it cant be done  Unless of course you have a solution.

now I see what you mean  no idea how you'd combat that one unless you buy those ones you've linked tbh. Mine are drop bi xenons and have the metal retaining springs so wasn't too much of an issue.

[r5gtt]

Boost gauge looks really good.
What gauge is it? And what wire did you splice into for power?

Thanks mate, its just a cheap one off eBay but me being fussy didn't want no dodgy names like dragon etc so got a plain simply one.

Wire was just linked into the one pictured as it comes on with the ignition.

[Rigsby]

Yeah it looks a clean simple dial, I don't want no silly names on one either.
As for the wire, do you simply wrap the wire round the spade of the fuse?

[r5gtt]

I wish o didn't sell my newsouth gauge but no point dwelling on the past 
Tbh I didn't even wrap it as it was pushed in with the blade fuse 

[Rigsby]

 

[r5gtt]

No worries 

[RetroRaz]

I need to come check these bulbs out bro lol. Do they come with a warranty? And are they in your projectors?

Sent from my SM-G955F using Tapatalk

[r5gtt]

Yeah bro wherever you're ready 

12months warranty and yes they're in my headlights

[r5gtt]

Oops  where'd he come from