All Things Mk5 > How to Guides / Troubleshooting
AWD / Quattrro Conversion
Marcos:
Fitted my ESP sensor same way as old one - works fine.
ABS In it Coding - used from old ABS Unit - works fine.
Ecu still as manual (wont accept VCDS coding).
You will need to code CAN and Central electronics + connect 5 wires to get haldex working (Can, +,-, ignition)
Sounds simply but took me a while as I went with swapping engine, gearbox to DQ500 (car was DSG already) + some other things.
Stupots:
I'm assuming anyone doing this will need to change to the AWD compatible ABS Unit? This is from mine if it helps at all:
Address 03: ABS Brakes Labels: 1K0-907-379-MK60-A.lbl
Part No SW: 1K0 907 379 AB HW: 1K0 907 379 AB
Component: ESP 4MOTION MK60 0102
Revision: 00H13001
Coding: 0006786
Shop #: WSC 01279 785 00200
VCID: 72EB3C436D5AFA8E927-8027
Marcos:
Yes. There is a chance to do spins with old ABS unit but to get rid of faults it has to be changed to 4MOTION one.
Marcos:
PS mine is A3 - but its same as Golf under the badges so.. :driver:
Octoparrot:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version