Was going through my watch list on YouTube

[r5gtt]

This guy made me laugh my f head off as he struggled to fit the bush in 

Mine went in smooth and flush where as he had troubles and still failed

[rich83]

What a prize bell end. 

[r5gtt]

What a prize bell end. 

I just burst out laughing in front of the misses and she's staring at me

Fully thing is that I used the little packet of grease supplied and he used a whole tub full 

[TAPPY]

I fitted mine Saturday and it slid straight in. He's prob the apprentice lol

[r5gtt]

Seriously I couldn't stop laughing at him.

My bolt was also seized so that gave me trouble but the bush  that's just pathetic and he proves his expertise on the world wide web 

[Dan_FR]

I'd disagree to be honest, just because yours went in fine it doesn't mean it does for everyone.... You can quite clearly see he did nothing wrong, the bush was greased up and lined up correctly, but it just didn't slide in easily

My insert was a PITA to slide in, but I was a lazy so-and-so and did it without removing the dogbone, but it really did not go in easily. I ended up using my trolley jack to lift it in to place whilst I guided it in

[r5gtt]

Well he shouldn't have filmed it as it makes him look  for not having it all the way home imho.
Trying to show the world how to fit a bush in and struggle is just too funny. hitting it with a rubber mallet and failing that he just leaves it bodged in there filthy with grease. that's unprofessional.

[petesimcock]

Are these any good on the road? Or do they just make your vision blurry and your girlfriend cross-eyed with extra cabin vibration?

[Shoduchi]

Are these any good on the road? Or do they just make your vision blurry and your girlfriend cross-eyed with extra cabin vibration?

They're good. You'll get a bit more vibrations but nothing major I think.

[AJG09]

Mines been on 2 days and I cant feel any vibrations at all and I'm normally the guy that mutes the radio because I "felt/heard" a noise/knock 

[r5gtt]

They definitely do vibrate from personal use and experience 

[TAPPY]

I fitted mine Saturday and can't really feel any vibrations and I would definitely recommend it, the car feels really responsive since fitting it 

[Madone]

When I bought my miltek system they provide one with the exhaust. Tbh it's one of the best mods I have done. Can't say I notice any extra vibration at all, and have lost the engine movement under hard acceleration. Everything feels tighter. 100% well worth doing. Maybe different makes offer more vibration due to harder grade of rubber, not sure, but mine hasn't offered any downside.

[Dan_FR]

You have to use it with the Miltek as their flexi is too small and won't last 5 minutes without it 

I have a Powerflex Black edition, which is a really stiff track orientated insert..... apparently....

Not a hint of vibration, 100% worth doing.

[Madone]

You have to use it with the Miltek as their flexi is too small and won't last 5 minutes without it 

I have a Powerflex Black edition, which is a really stiff track orientated insert..... apparently....

Not a hint of vibration, 100% worth doing.

Yea found out later that the reason they provide the bush was for the flex, at the time of fitting the exhaust we wandered if it was in the box by mistake !    :

Once I worked out what it was I fitted it asap. Nothing at all is mentioned in the miltek instructions. Wonder how many haven't been fitted !