Make a donation

Author Topic: Recommend settings for K04  (Read 3494 times)

Offline adzg60

  • Taking part
  • ***
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 34
    • Email
Recommend settings for K04
« on: February 06, 2016, 11:57:25 am »
I have the battery having been removed issue,

What settings do you reccend for a K04 conversion?

It has,
S3 injectors,
S3 and forge twinter cooler
3" tbe
Itg intake
RS4 return valve

But stock HPFP

Offline adzg60

  • Taking part
  • ***
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 34
    • Email
Re: Recommend settings for K04
« Reply #1 on: February 07, 2016, 10:14:23 am »
I also will need the data lead from my laptop to the sps controller, any info on these

Offline Madone

  • Always Involved
  • ****
  • Thank You
  • -Given: 8
  • -Receive: 27
  • Posts: 390
Re: Recommend settings for K04
« Reply #2 on: February 07, 2016, 08:46:08 pm »
Can't really guess that, you are best to contact whoever set it up in the first place. Could be a wide range based on the mods you list

Offline adzg60

  • Taking part
  • ***
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 34
    • Email
Re: Recommend settings for K04
« Reply #3 on: February 08, 2016, 06:56:47 pm »
Thanks for the reply bud, out of interest what do the base settings go back too from the 0-10 settings?

Offline Madone

  • Always Involved
  • ****
  • Thank You
  • -Given: 8
  • -Receive: 27
  • Posts: 390
Re: Recommend settings for K04
« Reply #4 on: February 08, 2016, 07:24:39 pm »
I think the default is 0,0,0, that's stock fuel, minimum boost and minimum timing

Offline jasam

  • Always Involved
  • ****
  • Thank You
  • -Given: 4
  • -Receive: 1
  • Posts: 58
  • My Ride: 2.0 tfsi k04, revo stage 3
Re: Recommend settings for K04
« Reply #5 on: March 10, 2016, 08:49:34 pm »
what stage u have? revo stage 3?

Not sure if it will go all on zero.. or it will be B6 T2 F8 , something like that. and car goes like crap.

I have revo 3, and savest setting was 838. when I dodnt have vcds to check timing, that was my settings.

Offline jasam

  • Always Involved
  • ****
  • Thank You
  • -Given: 4
  • -Receive: 1
  • Posts: 58
  • My Ride: 2.0 tfsi k04, revo stage 3
Re: Recommend settings for K04
« Reply #6 on: March 10, 2016, 08:49:59 pm »
what stage u have? revo stage 3?

Not sure if it will go all on zero.. or it will be B6 T2 F8 , something like that. and car goes like crap.

I have revo 3, and safest setting was 838. when I dodnt have vcds to check timing, that was my settings.

Offline Dan_FR

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 132
  • -Receive: 189
  • Posts: 1845
  • wait...what?
    • Email
Re: Recommend settings for K04
« Reply #7 on: March 10, 2016, 09:24:48 pm »
First of all, Revo Stage 3 NEEDS an uprated high pressure fuel pump

It will revert to B1, T0, F0 which is the equivalent of standard(ish) performance. B0 is valet mode, which results in no power at all, 3k ish rpm limiter etc.

Finally, do not guess. If you do not know your settings, then you need to do some dataloggin, or get your nearest dealer to set it up for you.

Buy a fuel pump!!!
TFSI... Revo Stage 2+... . WMI.... VCDS HEX + CAN, MPPS, VAG Commander & VAG tacho - South Wales

Offline jasam

  • Always Involved
  • ****
  • Thank You
  • -Given: 4
  • -Receive: 1
  • Posts: 58
  • My Ride: 2.0 tfsi k04, revo stage 3
Re: Recommend settings for K04
« Reply #8 on: March 10, 2016, 09:45:08 pm »
I see now , std hpfp , not best thing to have on k04 setup