Retrofiting mfsw steering wheel

[r5gtt]

Another little tip that I like to use is to put a marker pen line on the head of the bolt each time it had been re-tightened. A simple way of keeping track how many times it has been off 

Is that 5 times  really true or can we just put some fresh Loctite blue on the threads

I wouldn't see an issue with loctite 

[r5gtt]

@RetroRaz and @Newbieintown thanks guys for all your help and support for helping with my retrofit CC now all working perfectly 

[hugo]

Hi update on my retrofit!
I changed over the control module CH one, and also mf botton airbag wire.
I got the 3 yellow lights and I tried to code it and nothing is working, even the horn dosent work! Do I need a different slip ring?
Will try to code it again tomorrow.
I have s 06 gti manual, high line display. Rns510 also fitted

[RetroRaz]

What code have you entered in? I think all GTI's had a type 2 slip ring so you should be ok. Sounds like a coding issue

Sent from my SM-G928F using Tapatalk

[skard]

Is it a mk5 wheel with a loom part number starting 1K0, or a mk6 wheel with a 5K0 loom?

[hugo]

It's a mk5 steering wheel. I'll try again tomorrow as got some free time to try and code it

[hugo]

I have 0001534 and I changed it to 0002534 but didn't accept
Then I tried 0001734 it accepted but nothing changed

[skard]

Can you confirm the part number of the airbag loom you fitted?
Or did this come with a used wheel?

[hugo]

Hi the air bag loom is 1k 0971584c
I bought it separate

[skard]

Good that is the correct loom anyway.

That coding looks weird for mk5 16-steering, what was your original coding? Have you followed a coding guide for a mk6 wheel as that is different.
Is your car a manual and do you have cruise control? Try 0002022

What was the part number of your old steering module? Sometimes the slipring needs changed too

[hugo]

I hope it's just the coding!
Well the standard code is 0001534.
The car is manual, no cruise control.
The steering wheel is the standard one that came with the car
I just adapted the mf buttons to the wheel.
The original sw control module I think it ends in c but I'm not sure need to
Check tomorrow ( it's in the garage )

[hugo]

Hi just been to the car to do more coding and everything is good I had
0001534 changed to 0001134 and all good.
Thanks for all the help guys
Much appreciated