@r5gtt
You need vag commander bro. Do a search for highline faq. I made a document on it i while back
Sent from my SM-G928F using Tapatalk
Cheers Bro
@RetroRaz those ones on ebay good enough?
Dont think you can use SKC on 2008 car
Is this what we need to code the clocks in?.
Found a vag commander on ebay
Allows managing of brand new units (and immobilizer units) where is allowed programming of PIN, SKC, BGW, MAC. Functions are under CAN-TP2.0
² Most of popular diagnostic requests, identifications, coding, adaptations, DTCs and s.o. Functions are under CAN-TP2.0
Special Functions:
² Odometer correction in instrument clusters and EDC15x
² Read Security Access Code/Login WFS
² Read/program immobilizer data
² Read/write EEPROM from instrument cluster/immobilizer. All supported clusters CAN/K
² VAG MMI TV Activation
² Read/Write EEPROM of Engine Control Units BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-Cartronic ME7.8, Porsche
² Key learning buttons for easy usage (not needed security code). Can do component security authorization
² Key learning Porsche CAYENNE (not needed security code) K+CAN
² Custom memory reading from different units like ECUs, EZS-Kessy and s.o
² Reading flash memories EDC16x, EDC15x, ME7x, MED951, MED751 (with next update will be possible programming of flash memories
