All Things Mk5 > Mk5 General Area

Mk5 Golf with power folding mirrors with key remote

<< < (22/23) > >>

Sebas_theFish:

--- Quote from: CraigP on April 08, 2022, 01:33:13 pm ---Without sounding stupid, what’s VCP..?

--- End quote ---
VAG CAN Pro. Similar to VCDS but can also  modify firmware in control units etc. More than what VCDS can do.

Sent from my Samsung Smart Fridge

Shoduchi:

--- Quote from: Sebas_theFish on April 08, 2022, 01:37:23 am ---
--- Quote from: Shoduchi on April 08, 2022, 01:04:34 am ---
--- Quote from: Sebas_theFish on April 07, 2022, 11:57:43 pm ---
--- Quote from: CraigP on April 07, 2022, 05:13:48 pm ---I know this is a pretty old thread now but I’m hoping I can still find out some information….?

I have a 2008 Golf GT 170 with the folding optional mirrors as standard. Can I get the key hold folding done by just reprogramming or do I need a new module/s and wiring..?

Thanks

--- End quote ---
If you GEN 3 MAX N modules apparently it's possible with VCP... That's what I have and it didn't work though. Will put my Mk6 module back in this weekend and see if it works with that.

Sent from my Samsung Smart Fridge

--- End quote ---

I had this done on both my Golfs (GT Sport and GTI Ed. 30) with these part numbers:

Address 42: Door Elect, Driver        Labels: 1K0-959-701-MAX3.lbl
   Part No SW: 1K0 959 701 N    HW: 1K0 959 701 N

Try a different retrofitter.  :wink:

--- End quote ---
Same part numbers as mine. What software version are yours? Did you code it yourself or take it to someone?

Sent from my Samsung Smart Fridge

--- End quote ---
It was my friend who coded it. I don't know the software version but it was many years ago.

Sebas_theFish:
Success!

Got it working with my Mk6 module. Ran the VCP OCF and it works like a charm, programmed it to unfold with ignition on.

pudding:
Can you do anything else with VC Pro, such as the engine ECU, or is just for central electronics modules?

I'm looking to de-immobilise a spare engine ECU but don't know what tools/software are needed for that?

Sebas_theFish:

--- Quote from: Pudding on April 15, 2022, 11:39:34 am ---Can you do anything else with VC Pro, such as the engine ECU, or is just for central electronics modules?

I'm looking to de-immobilise a spare engine ECU but don't know what tools/software are needed for that?

--- End quote ---
VCP won't do immobiliser work. You need something like VVDI.

Sent from my Samsung Smart Fridge

Navigation

[0] Message Index

[#] Next page

[*] Previous page