Mk5 Golf with power folding mirrors with key remote

[SI-R32]

need eeprom tweak? anyone?!

There is a cheap version of the software/lead to be able to do this (pvt message me for link as i'm not posting here) so if your up for a bit of diy you should be able to do this.

i'll let you know soon when my lead comes.

[v4rley]

Can you manipulate and controller or does it have to be gen3?

[Shoduchi]

It's gen3 limited.

[Shoduchi]

need eeprom tweak? anyone?!

There is a cheap version of the software/lead to be able to do this (pvt message me for link as i'm not posting here) so if your up for a bit of diy you should be able to do this.

i'll let you know soon when my lead comes.

Unless olsen-72 or anyone who knows (like my friend) explains what you have to change in the code, I highly doubt that anyone can do it with just the ODIS cable.

[SI-R32]

It's not just an ODIS cable. It's a flashing cable, just have a look round on the net, I'll let you know when it comes, 38 quid can't be a bad price

Sent from my SM-G930F using Tapatalk

[olsen-72]

Have you looked inside of the door module SI-R32? Have you seen eeprom?
In mk5 only one module is capable of it.

[Stig_gti]

Can this be done on a mk6 golf gti already have dipping mirrors when in reverse.

[Shoduchi]

Can this be done on a mk6 golf gti already have dipping mirrors when in reverse.

It's easier on a mk6.

[SI-R32]

Have you looked inside of the door module SI-R32? Have you seen eeprom?
In mk5 only one module is capable of it.

I'm only going on what the lead is telling me, I'll wait to get it first as I need to walk before running, plus I'd like to learn how to use it before sharing any information with everyone in the sprit of the forum

Sent from my SM-G930F using Tapatalk

[Shadowman]

im planning to retrofit the electric folding mirrors with dip in reverse,puddle lights and i would like the auto folding with the key because is very useful where i live.
but theres not a diy guide for the folding on remote :/
also im a bit confused about the part number of the door module which one should say the N in my door control module there are 3 part numbers to on the motor and 1 one the black box (module) and the part number that i get from the vcds scan matches on the one that is on the motor.

[r5gtt]

Thread revival 

Looks like I'll be driving up to see Alex soon as soon as I get my Rev N modules

[Rossimac]

Like r5gtt - I'm interested to do a bit of EEPROM flashing on my GEN3 5dr controllers!

Hate using that damn knob to control the mirror folding! 

[r5gtt]

Like r5gtt - I'm interested to do a bit of EEPROM flashing on my GEN3 5dr controllers!

Hate using that damn knob to control the mirror folding! 

The reason I want to do mine is that I have to switch it over to the heat position for it to fold which is annoying as I won't be able to use the heated glass option.

[Rossimac]

Well, I found this:

https://www.drive2.ru/l/9110164/

As this is a Tiguan - are these the same settings needed for a Golf's GEN3 controller like mine:

Address 42: Door Elect, Driver        Labels: 1K0-959-701-MAX3.lbl
   Part No SW: 1K0 959 701 N    HW: 1K0 959 701 N
   Component: Tuer-SG         005 0986 
   Coding: 0000694
   Shop #: WSC 01279 785 00200
   VCID: 39790C71700FA9E9685-806C

[Shoduchi]

Well, I found this:

https://www.drive2.ru/l/9110164/

As this is a Tiguan - are these the same settings needed for a Golf's GEN3 controller like mine:

Address 42: Door Elect, Driver        Labels: 1K0-959-701-MAX3.lbl
   Part No SW: 1K0 959 701 N    HW: 1K0 959 701 N
   Component: Tuer-SG         005 0986 
   Coding: 0000694
   Shop #: WSC 01279 785 00200
   VCID: 39790C71700FA9E9685-806C

That coding shown won't make any difference. The coding needed isn't made with VCDS.