All Things Mk5 > Mk5 General Area
Mk5 Golf with power folding mirrors with key remote
SI-R32:
--- Quote from: Nasir on February 15, 2016, 11:23:05 am ---
--- Quote from: olsen-72 on February 15, 2016, 11:21:39 am ---That cannot be done with VCDS
--- End quote ---
Thanks. I'll stick to using the mirror switch then.
--- End quote ---
its done via firmware changes inside the controller with some aftermarket software possibly VAG CAN Pro, either some clever sod can manipulate the coding or the vag can people provide a new flash for the existing firmware.
or for around 80 quid you can just use a SEAT door module on the drivers side.
RetroRaz:
--- Quote from: SI-R32 on February 15, 2016, 12:09:48 pm ---
--- Quote from: Nasir on February 15, 2016, 11:23:05 am ---
--- Quote from: olsen-72 on February 15, 2016, 11:21:39 am ---That cannot be done with VCDS
--- End quote ---
Thanks. I'll stick to using the mirror switch then.
--- End quote ---
its done via firmware changes inside the controller with some aftermarket software possibly VAG CAN Pro, either some clever sod can manipulate the coding or the vag can people provide a new flash for the existing firmware.
or for around 80 quid you can just use a SEAT door module on the drivers side.
--- End quote ---
I bought a seat door controller, going to try it this weekend.
SI-R32:
--- Quote from: RetroRaz on February 15, 2016, 12:19:57 pm ---
I bought a seat door controller, going to try it this weekend.
--- End quote ---
Do you have a 3 door? PITA if you have a 5 door.
RetroRaz:
--- Quote from: SI-R32 on February 15, 2016, 01:43:52 pm ---
--- Quote from: RetroRaz on February 15, 2016, 12:19:57 pm ---
I bought a seat door controller, going to try it this weekend.
--- End quote ---
Do you have a 3 door? PITA if you have a 5 door.
--- End quote ---
I have a 5 door. The back doors are locked using the CCM as I have a GEN1 control module. On my driver door card I have no controls for the rear windows.
I had a read through your guide on r32oc, looks like I wont need to do the metal peice mod for the windows going up and down
I hope its just coding and thats all.
RetroRaz:
So fitted it today, door mirrors fold on remote, indicators work, haven't checked puddle lights yet. Had an issue with getting thd door to lock, window switch working, lock/unlock button on door , door warning lights and the mirror adjuster. Basically everything on the driver door.
I have a feeling the pin outputs are different on the controller. It might be that the seat door control module i bought is gen2 or gen3. And my vw one was a gen1.
Going to research it further
Sent from my SM-G928F using Tapatalk
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version