All Things Mk5 > Mk5 General Area
Mk5 Golf with power folding mirrors with key remote
Shoduchi:
--- Quote from: SI-R32 on March 31, 2017, 08:28:45 pm ---I've been reading loads on this and learning tons.
A quick breakdown of things is that mk6 modules (5k0) use UDS protocol to communicate not old can protocol and now with the easily available Vag can pro software around right now you can easily flash these via this software and even use VCDS to do it, all documented and worked out by a guy call Ruben (n4s) on the my Tiguan Forum. There are 2 options either it folds with locking or ignition off I think, something like that.
So some of us may have 5k0 modules in our cars if you've bought a set from ebay or another person or dealer etc. but you probably wont have them so we're stuck with our old 1k0 modules which can only be modified via VCP or similar software which can modify the internals of the module.
This was found out by this guy from Germany.
https://www.facebook.com/VcdsWorkx/?fref=ts
but is kept very secret which I can understand a little, so as far as I can tell there is one person on here (possibly in whole of UK) who has been given the info to be able to mod gen3 max modules to allow your mirrors to fold from the key (by holding it down) and he charges for this service.
I've messaged the person on Facebook in Germany but am doubtful if he will give me any info, so as Eddie nl gave me the info on using a SEAT module over 2 years ago now and its what I've already been using for all that time, I think for now I'll just stick with this as all the info to do it is kept to a privileged few.
I would like to thank n4s for giving me some good info.
--- End quote ---
n4s is local to me and it was him who coded both my Golfs to have folding mirrors with the key. He learned how to do it from the German retrofitter. He's the nicest guy you can meet too. :smiley:
SI-R32:
So just a little update on this, first i had ordered Van Can Pro copy from somewhere thinking that this would be a wise buy, sadly this wasn't the case but i'll explain a little more soon.
I was trawling through the net when i stumbled across this
http://forum.golf6.pl/mk6-retrofitting/skladanie-lusterek-z-poziomu-pilota-t159-75.html
You'll need a bit of translate but kinda easy to keep up, lots going on but mainly the bits to change in the module etc be it 1K0 or 5K0 but you need a program to interrogate the module and change things, also modules require security access before you can do anything, so i plugged my s**t copy of VCP in only to find it did nothing, i was a little disheartened but thought sod it i''ll buy the fully bloody version.
Now from installing the copy i got an idea what the program is capable of and it already gives you the folding mirror option on a one press solution for 1K0 and 5K0 modules not just N modules.
This afternoon I got my now fully working version of VCP up and running and put my old 1K0 module back in its from 2010, some of you may know I've had a skoda 1T0 module in my car to do the folding mirrors for a few years but i wanted it done properly due to a couple of silly things the 1T0 module does.
Here is the write up i did for that
http://www.r32oc.com/topic/44240-fold-mirrors-with-from-key-with-auto-closure/
So with my 1K0 module in
I pressed a few buttons on VCP and now my mirrors fold with a long press from the key from a golf module and open as soon as i open the drivers door, rather than with ignition which i'd already been used to before from the 1T0 module.
So next step is to see if the 1T0 module will reprogram to fold mirrors upon opening the drivers door?
plus i want to try an older 1K0 module from say 2005 onwards that aren't N versions, obviously they still need the folding option in them to start with it can't make low modules folding.
So if anyone wants me to try coding there mirrors up for FREE please get in touch (i'm in Maidstone area) and we'll experiment to see if it can be done, which i don't see why not.
one last thing the mirror worked the other way round to the passenger side one, which I tried to rectify without swapping the wires over but i had to just swap the wires over in the mirror plug for it to be in tandem. overall a productive and happy day.
one other thing to try i've been collecting 5K0 drivers units from Europe, now putting these on a RHD car makes things all work wrong way round, but VCP also can change modules from LHD to RHD so i'f this works and say your old 1K0 version can't be coded then you could use 5K0 version to see if works.
doylebros:
--- Quote from: SI-R32 on April 08, 2017, 08:41:50 pm ---So just a little update on this, first i had ordered Van Can Pro copy from somewhere thinking that this would be a wise buy, sadly this wasn't the case but i'll explain a little more soon.
I was trawling through the net when i stumbled across this
http://forum.golf6.pl/mk6-retrofitting/skladanie-lusterek-z-poziomu-pilota-t159-75.html
you'll need a bit of translate but kinda easy to keep up, lots going on but mainly the bits to change in the module etc be it 1K0 or 5K0 but you need a program to interrogate the module and change things, also modules require security access before you can do anything, so i plugged my **it copy of VCP in only to find it did nothing, i was a little disheartened but thought sod it i''ll buy the fully bloody version.
now from installing the copy i got an idea what the program is capable of and it already gives you the folding mirror option on a one press solution for 1K0 and 5K0 modules not just N modules.
This afternoon I got my now fully working version of VCP up and running and put my old 1K0 module back in its from 2010, some of you may know I've had a skoda 1T0 module in my car to do the mirrors for a few year but i wanted it done properly.
here is the write up i did for that
http://www.r32oc.com/topic/44240-fold-mirrors-with-from-key-with-auto-closure/
So with my 1K0 module in
I pressed a few buttons on VCP and now my mirrors fold with the key from a golf module and open as soon as i open the door, rather than with ignition which i'd already been used to before.
So next step is to see if the 1T0 module will reprogram to fold mirrors open from door?
plus i want to try an older 1K0 modules from say 2007 on wards that aren't an N version, obvvisly they still need the folding option in them to start with it can't make low modules folding.
So if anyone wants me to try coding there mirrors up for FREE please get in touch (i'm in Maidstone area) and we'll experiment to see if it can be done, which i don't see why not.
one last thing the mirror worked the other way round to the passenger side one which tried to rectify with out swapping the wires over but i had to just swap the wires over in the mirror plug for it to be in tandem. overall a productive and happy day.
one other thing to try i've been collecting 5K0 drivers units from Europe, now putting these on a RHD car makes things all work wrong way round, but VCP also can change modules from LHD to RHD so i'f this works and say your old 1K0 version can't be coded then you could use 5K0 version to see if works.
--- End quote ---
Well done SI all your investigative work and efforts have paid dividends :happy2:
r5gtt:
Well done @SI-R32 great find but still way too far for me living in central London :signLOL:
Shoduchi:
@SI-R32 Well done! Another option available to get this working. :drinking:
Just to add that with the EEPROM coding of my 1K0 rev N with ODIS, it's possible to choose the opening of the mirrors when opening the door or when turning on the ignition. I prefer the latter since I don't always need the mirrors to open when I open my doors. :wink:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version