All Things Mk5 > Mk5 General Area
Mk5 Golf with power folding mirrors with key remote
postoronniy:
Sorry for bring this up.
I has the 1K0...N door module which dont fold and I know for sure that the same N module with another SW fold mirrors.
My idea is to copy the software from one module to another. Is it possible? Someone did this !?
Shoduchi:
--- Quote from: postoronniy on March 04, 2019, 07:42:36 pm ---Sorry for bring this up.
I has the 1K0...N door module which dont fold and I know for sure that the same N module with another SW fold mirrors.
My idea is to copy the software from one module to another. Is it possible? Someone did this !?
--- End quote ---
It should be possible to update the revision of the module firmware with a VCP cable.
olsen-72:
Revision N fold for sure. In a fact it can fold on remote as well
valdikiss@gmail.com:
Hi,
I have a 2008 Golf mk5. I installed a pair of electrically folding Golf mk5 mirrors. The number of control units is 1K0959701Q (793M) and 1K0959702Q (792M). These are from a Passat B6! Unfortunately, not everything works perfectly. The mirrors fold, but the windows do not run automatically. What can I do? Thx
davtsik:
--- Quote from: Cr33D on April 10, 2017, 06:07:04 pm ---Of from what I've read on different forums, I don't think anyone figured out what to change to adapt for an example scirocco, EOS, etc. modules to run with MK5 window drop distance.
I think this might be a matter of a motor as for example all scirocco do have a different motor part number compared to mk6, if I remember correct.
So maybe issue is within motor and not a module itself ?
Although it is confirmed that MK6 modules work fine without any issues. Obviously rewiring is required to comply with Max Gen modules.
I already have folding mirrors that I need to fit and looking on ebay for modules + motors with correct part number.
PS.
you don't necessarily need a full VCP, you can dump eeprom via eeprom readers and clip into the module directly, modify it and reflash it. [I have somewhere information which reader you would need to use]. Odis should be able to do so as well through downloading firmware, editing it with hex file editor and loading it back into the module. I was going to try it some time ago but got a shed loads of work recently and all car work has to wait, unfortunately.
--- End quote ---
hi,
Where can i download firmware? I have 1K0959701Q modul. Key does not close the mirror.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version