Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Loom change for rsap or normal bluetooth?  (Read 1587 times)

Offline fazi123

  • Always Involved
  • ****
  • Thank You
  • -Given: 15
  • -Receive: 12
  • Posts: 369
    • Email
Loom change for rsap or normal bluetooth?
« on: February 19, 2016, 12:18:14 pm »
Hi guys,

Im installing my mdi kit along with my RCD510. I also have a bluetooth kit (rsap) which I want to upgrade to the unit where I can stream music from etc.

Is the loom the same for both of these? The reason I ask is I can then just install the loom etc now and plug the unit in when I get it.

Thanks,
Faz
« Last Edit: February 19, 2016, 03:05:54 pm by fazi123 »
Logged

Offline Pashka

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 4
  • -Receive: 33
  • Posts: 624
    • Email
Re: Loom change for rsap or normal bluetooth?
« Reply #1 on: February 20, 2016, 01:56:08 pm »
If your exsisting loom is from the factory with the car it will have only one channel for the sound, need to add two wires for another side to have stereo sound. Except that looms are the same.
Logged
06 1.9 TDI Owner. Retrofits: Bixenons, Drls, Full GT/GTI exterior, RNS510+MDI+Premium Bluetooth+RVC+OPS, Full Fis, MFSW, Cruise control, TPMS, Polar Fis, Boot pop up and more.. :)
Coding, diagnostic and retrofits in Leeds
Pre coded Can Gateways for battery drain issues with RNS510 and similar headunits
Premium Bluetooth modules/kit
RNS510 Service - codes, maps/firmware updates
Latest V8 West EU maps update service for RNS315

Offline mdmay

  • Always Involved
  • ****
  • Thank You
  • -Given: 38
  • -Receive: 14
  • Posts: 351
    • Email
Re: Loom change for rsap or normal bluetooth?
« Reply #2 on: March 03, 2016, 08:43:40 pm »
Do you know what wires are needed

Sent from my ONE A2003 using Tapatalk

Logged
Regards,

Mike

Offline Pashka

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 4
  • -Receive: 33
  • Posts: 624
    • Email
Re: Loom change for rsap or normal bluetooth?
« Reply #3 on: March 03, 2016, 08:56:55 pm »
Quote from: mdmay on March 03, 2016, 08:43:40 pm
Do you know what wires are needed

Sent from my ONE A2003 using Tapatalk
What did you mean? pinouts or wires itself? 1 pair shielded or any 2 wires.
Logged
06 1.9 TDI Owner. Retrofits: Bixenons, Drls, Full GT/GTI exterior, RNS510+MDI+Premium Bluetooth+RVC+OPS, Full Fis, MFSW, Cruise control, TPMS, Polar Fis, Boot pop up and more.. :)
Coding, diagnostic and retrofits in Leeds
Pre coded Can Gateways for battery drain issues with RNS510 and similar headunits
Premium Bluetooth modules/kit
RNS510 Service - codes, maps/firmware updates
Latest V8 West EU maps update service for RNS315

Offline mdmay

  • Always Involved
  • ****
  • Thank You
  • -Given: 38
  • -Receive: 14
  • Posts: 351
    • Email
Re: Loom change for rsap or normal bluetooth?
« Reply #4 on: March 03, 2016, 09:56:18 pm »
Pinouts please.  Many thanks

Sent from my ONE A2003 using Tapatalk

Logged
Regards,

Mike
Pages: [1]   Go Up
« previous next »