All Things Mk5 > R-Tech Zone
Rtech Pre Cat Delete
shoaybmakda:
@Lewo i spoke to dynodaze and he said the same cost depending on how its fitted to the car but starting cost is £125 and could rise.
@white91 @Dan_FR no idea how to do it myself otherwise i would..have seen a how to online but i don't think i have the technical know how to get it without breaking some sort of a sensor.. might have to follow what @rich83 said and hunt a decat downpipe instead (which I'm assuming will fit fine to stock?)
white91:
It's only a few bolts, I struggled on axle stands, but with ramp it's easy. I'd try some local exhaust places first
Sent from my iPhone using Tapatalk
Dan_77:
--- Quote from: shoaybmakda on March 18, 2016, 06:10:24 pm --- no idea how to do it myself otherwise i would..have seen a how to online but i don't think i have the technical know how to get it without breaking some sort of a sensor.. might have to follow what @rich83 said and hunt a decat downpipe instead (which I'm assuming will fit fine to stock?)
--- End quote ---
Where abouts are you mate surely there is someone on here close by that has done it themselves that would give you a lift for an hour to do it
shoaybmakda:
I'm based in Leicester @Dan_77 I'll be getting it up on a ramp next weekend hopefully. Just hope I don't damage any sensors or anything of the like.
Dan_77:
Just take your time mate , its straight forward enough, the only tricky bit is the bolts holding the downpipe on as there awkward to get to and space is limited, I unclipped the wire on the top sensor and removed it once the downpipe was off as its a lot easier to do that way
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version