MAF

[Janner_Sy]

is there any where online that i can get a MAF.  or would i need to go to a stealership.

also what is the going rate for a MAF as well.

last question is, when i last checked the plastic loopthat you normally have on the top of the maf connector to release it from the MAF itself has snapped off. Is there a little trick to getting it off or will it be an absolute b*stard to get off

[SteveP]

Same thing happen to mine, there is just a knack to pulling the little catch so it pop's off cleanly.

I checked the dealer price which resulted to me buying one from ebay 

[Janner_Sy]

looked at ebay couldnt find any at all.

tried all sorts of searches

TFSI MAF, 2.0T MAF, massif flow sensor etc nothing. there used to be loads on there.

Did you notice a difference when replacing yours. mine seems to have developed a flat spot at the high rpm recently, going to change he MAF to see what difference it makes.

how much did you pay steve if you dont mind me asking

[SteveP]

Just rechecked, the list is just over £100 and the part number is 06F 906 461 A  

I paid something like £20 for a low mileage used one.

I logged the airflow before and after and there was no change, but I had no flat spot, I just replaced it because of the broken tab.

[jonnyc]

Same thing happen to mine, there is just a knack to pulling the little catch so it pop's off cleanly.

Yep me too.. Just replaced mine.. Big difference!  

Yeah with those clips, PUSH the connector as if your trying to force it further ON, then flick the little tab and when you release the pressure it will just come off..

See so many people with screwdrivers trying to pry them off lol..  

[Janner_Sy]

cheers JC. you know of any cheap places to buy from or is it just ebay when thye pop up

[SteveP]

If you want to try one another one first to prove if it's a fault on yours your welcome to borrow my old one with the broken clip before you splash out on a new one 

[jonnyc]

cheers JC. you know of any cheap places to buy from or is it just ebay when thye pop up

Just got mine from VW.. You may aswel get a new one then you can eliminate the MAF being the problem with 100% confidence.. Otherwise you will always wander..

[Janner_Sy]

If you want to try one another one first to prove if it's a fault on yours your welcome to borrow my old one with the broken clip before you splash out on a new one 

@steveP

much appreciated. was your maf broken before or just replaced due to the clip snapping

@Jonny

I think your right TBH, id feel happier knowing i had the genuine part . what was the stealer price JC

[SteveP]

Just the broken clip, it was working 100% fine when it was removed

[jonnyc]

If you want to try one another one first to prove if it's a fault on yours your welcome to borrow my old one with the broken clip before you splash out on a new one 

Can't argue with that..

I paid just over £90 for mine..

[Janner_Sy]

PM sent to our very own steveP

[Oli]

Is it the same MAF between the K03 and K04 engines?? 

[SteveP]

According to ETKA yes   

[Oli]