Wheel Spacers Edition 30

[ed30Lewis]

Hi all,

Wanting to know what the largest spacer is which I can run on the front wheels of my Edition 30. It has the standard Pescara alloys but is lowered on the H&R Springs.

The car is driven hard from time to time and i dont want it to rub/scrape at all from hard cornering. Ive searched the forum and cant seem to find a definitive answer.

What size spacers are people running with the same/similar setup to mine? Any help/advice would be much appreciated.

Thanks 

[slix]

I'm running 15mm on stock suspension and the wheels sits exactly flush with the arch and catches sometimes when I hit a deep hole fast. So I'm guessing you wouldn't be able to go that wide. Probably doesn't help you but just my 2 pence.

[ed30Lewis]

I'm running 15mm on stock suspension and the wheels sits exactly flush with the arch and catches sometimes when I hit a deep hole fast. So I'm guessing you wouldn't be able to go that wide. Probably doesn't help you but just my 2 pence.

Thanks for your response dude, appreciate it 

Im thinking 8mm, 10mm or 12mm (absolute max) to avoid any rubbing but cant seem to find any solid answers as to which one i can squeeze in there to give the widest stance possible

Hopefully someone will be able to confirm or feedback their findings 

[Dan648v]

Id go 10mm all round. Better looks and no real chance of scrubbing.
I'm spaced 10mm all round all the way down on Ap coilovers with no problems 

[Kam88]

i used to have 15mm on front and 20mm on back

[ed30Lewis]

Id go 10mm all round. Better looks and no real chance of scrubbing.
I'm spaced 10mm all round all the way down on Ap coilovers with no problems 

Perfect! Just what I was after. Thanks 

[ed30Lewis]

i used to have 15mm on front and 20mm on back

Was you lowered and did it rub with passengers or under hard cornering?