Author Topic: ABS / ESP / Tyre pressure lights on and ABS not working (Read 1140 times)

Flint · « **on:** March 30, 2016, 07:21:56 pm »

Hi All

A while ago I had the typical sensor issue on the drivers side rear wheel. Had the sensor and the bearing replaced and all was fine for 6 months. I've now got the sane fault code on the same wheel.

Should the ABS work with this issue? I tested mine today and mine isn't working.

Thanks

markrtw · « **Reply #1 on:** March 30, 2016, 08:16:31 pm »

I've had similar issues. Its probably the ABS ring on the inside of the hub out of tolerance. If it's only 6 months old, take it back to the garage. Should have a years warranty.
Is the bearing genuine?

Flint · « **Reply #2 on:** March 30, 2016, 08:26:22 pm »

Thanks

Yes it was a genuine vag bearing. Do you know if the ABS should still work with this issue?

Cheers

Andy · « **Reply #3 on:** March 30, 2016, 08:35:45 pm »

If the abs light is on then no

markrtw · « **Reply #4 on:** March 30, 2016, 09:08:46 pm »

Yep - ABS light shows fault with the system. What is the error code? I guess its something like intermittent signal?

Flint · « **Reply #5 on:** March 30, 2016, 10:32:10 pm »

Thanks to you both.

Yep it's saying intermittent signal.

Author Topic: ABS / ESP / Tyre pressure lights on and ABS not working (Read 1140 times)

Flint

ABS / ESP / Tyre pressure lights on and ABS not working

markrtw

Re: ABS / ESP / Tyre pressure lights on and ABS not working

Flint

Re: ABS / ESP / Tyre pressure lights on and ABS not working

Andy

Re: ABS / ESP / Tyre pressure lights on and ABS not working

markrtw

Re: ABS / ESP / Tyre pressure lights on and ABS not working

Flint

Re: ABS / ESP / Tyre pressure lights on and ABS not working