All Things Mk5 > How to Guides / Troubleshooting
DIY - Cam Chain and Tensioner Guide
rich83:
No problem.
Yes thats an error with the guide... the engine needs to be rotated via the crank shaft. :happy2:
hoon98:
Just finished this!! Thanks so much for the guide, it was invaluable in getting the job done and saved a tonne of money!! :happy2:
Wasn't without its issues though... First thing that went wrong was when manouvering the coolant lines... a nipple on one of the plastic flanges broke off showering me and the engine bay in coolant!
Secondly despite being careful I managed to strip the Adjuster bolt when trying to undo it... Bit of a nightmare, had to drill it a bit to relieve some of the torque before opening it with a spline hammered in to it...
Got there eventually though! :doh:
pudding:
You really need someone to push hard on the breaker bar whilst you undo it, or use a decent cordless impact wrench if working solo :happy2:
JordanMR:
Very helpful :happy2: thank you! lets try it
Onethreelee:
Awesome guide I have a feeling I'm going to need this and feel like it's already saved me well done
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version