Yet another job interview closer to home tomorrow

[TAPPY]

How stupid do I fell right now   
been having to go all the way through the links and find it 

Thanks 

Haha no worries 

[r5gtt]

I should take you mobile number for when I need any help or tips 

[TAPPY]

I should take you mobile number for when I need any help or tips 

Haha it's easy once you've done a couple most cars are pretty much the same lol

[r5gtt]

I should take you mobile number for when I need any help or tips 

Haha it's easy once you've done a couple most cars are pretty much the same lol

That was a joke haha  I've stripped many cars    all legit mind 

[TAPPY]

I should take you mobile number for when I need any help or tips 

Haha it's easy once you've done a couple most cars are pretty much the same lol

That was a joke haha  I've stripped many cars    all legit mind 

I know lol. So you have had some practice lol

[r5gtt]

Yes mate, I used a pry bar Thompson local directory and rag to push a dent out 

Let me ask you ad you've most like seen the inner of the tail gate.
next to the rear wiper motor rhs there's a plate bonded on, what the heck is that for as I would have pushed that dent out in 10 seconds had that plate not been there.

I've done some body damage repairs to a seat leon front side and rear. skoda vrs side B post door and sill  damage. Nissan front chop job and many more so yes I have dabbled on that side of repairs.

[TAPPY]

Yes mate, I used a pry bar Thompson local directory and rag to push a dent out 

Let me ask you ad you've most like seen the inner of the tail gate.
next to the rear wiper motor rhs there's a plate bonded on, what the heck is that for as I would have pushed that dent out in 10 seconds had that plate not been there.

I've done some body damage repairs to a seat leon front side and rear. skoda vrs side B post door and sill  damage. Nissan front chop job and many more so yes I have dabbled on that side of repairs.

I believe the bit your on about is a strengthening plate which joins the inner tailgate to the outer iirc.
You probably know more than me lol

[r5gtt]

Yes mate, I used a pry bar Thompson local directory and rag to push a dent out 

Let me ask you ad you've most like seen the inner of the tail gate.
next to the rear wiper motor rhs there's a plate bonded on, what the heck is that for as I would have pushed that dent out in 10 seconds had that plate not been there.

I've done some body damage repairs to a seat leon front side and rear. skoda vrs side B post door and sill  damage. Nissan front chop job and many more so yes I have dabbled on that side of repairs.

I believe the bit your on about is a strengthening plate which joins the inner tailgate to the outer iirc.
You probably know more than me lol

That's correct I just didn't know the correct terminology lol
I swear if I had a circular air saw or electric I would have chopped it out as the dent was more important to get out than a silly reinforcement plate 

[TAPPY]

Haha but then the dent prob wouldn't have stayed out lol

[r5gtt]

Why not the plate is more or less fooked it as I couldn't get it back to stick as it was heavily bonded but came off with a ping 

[TAPPY]

Haha should have just got a new tailgate lol

[r5gtt]

No monies atm and easier to repair the existing one.
No headache pulling out wiring looms and replacing everything. 

[TAPPY]

No monies atm and easier to repair the existing one.
No headache pulling out wiring looms and replacing everything. 

That's true. I hate pulling wiring looms from tailgates it's such a pita 

[r5gtt]

No monies atm and easier to repair the existing one.
No headache pulling out wiring looms and replacing everything. 

That's true. I hate pulling wiring looms from tailgates it's such a pita 

That's why I repaired rather than replaced or I could have waited for a boot lid lol.

[TAPPY]

It's ok doing it until the wires get stuck lol