Make a donation

Author Topic: EPC and traction control coming and going?  (Read 1328 times)

royjh

  • Guest
EPC and traction control coming and going?
« on: May 17, 2016, 04:26:36 pm »
Can anyone help me with this issue please? Goes into limp mode of its own accord?

Offline rashg60

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 41
  • Posts: 432
Re: EPC and traction control coming and going?
« Reply #1 on: May 19, 2016, 09:08:20 pm »
I had similar issues with the warning lights coming on intermittently, however, car wasn't going into limp mode.

Mine was the ABS speed sensors - replaced them and it was fine after that.

I'd suggest you get it hooked up to VCDS and get a scan to see where the fault lies exactly.
Previous motors (in order of succession since 1994):-

VW Golf MK2 GTi 8v
Peugeot 205 1.9 GTi
VW Corrado G60 Supercharged
Volvo C70 2.0 Turbo Convertible
Audi TT MK1 1.8T quattro (225)
Mercedes CLS 320 V6
Audi TT MK1 3.2 V6 Quattro
Audi A4 Convertible 1.8T Quattro
VW Golf MK5 GTi 2.0 Turbo

Offline AJG09

  • Always Involved
  • ****
  • Thank You
  • -Given: 24
  • -Receive: 21
  • Posts: 301
  • My Ride: 2005 mk5 golf 1.6 FSI
Re: EPC and traction control coming and going?
« Reply #2 on: May 19, 2016, 11:30:44 pm »
I had this very recently but again no limp mode. I pulled the two green fuses in the engine bay fuse box to inspect them. (Think its the 2 on the top right as you look at the fuse box, look in your handbook it says in there) anyway one of the fuses hadent blown but one of the blades looked like it was starting to melt!. No idea why it didnt blow but i swapped it for a new one and touch wood the problem hasnt come back. Its been about a month now.

Gotta be worth a look. I have pictures if you want if im not making sence  :happy2:

Offline AJG09

  • Always Involved
  • ****
  • Thank You
  • -Given: 24
  • -Receive: 21
  • Posts: 301
  • My Ride: 2005 mk5 golf 1.6 FSI
Re: EPC and traction control coming and going?
« Reply #3 on: May 19, 2016, 11:32:21 pm »
Also just to add when scanned i was getting implausible signal from the abs pump