Make a donation

Author Topic: Car won't run !!!  (Read 1097 times)

Offline Markis236

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 1
  • Posts: 115
  • If in dout boost it out !
    • Email
  • My Ride: Mk5 golf gti (ko3) mods. Audi s3 8p intercooler,psi tuning 2.5' throttle pipe,updated diverted valve,revo oil catch can
Car won't run !!!
« on: June 12, 2016, 09:56:52 am »
Ok so I finally
Got my car back to stage 2 at revo and when I was driving home my intercooler to throttle boost pipe blow off and now my car won't run at all ! It starts and then cuts out and won't move any where ! Does it keep the existing fault in the ecu and have to be deleted before it will run right ?

Offline slix

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 7
  • -Receive: 38
  • Posts: 634
  • Stage 1 ED30 Owner
Re: Car won't run !!!
« Reply #1 on: June 12, 2016, 10:13:19 am »
It should run with pipe put back on even with a code stored.
Stage "1.5" ED30 [330BHP] Rtech


Offline Markis236

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 1
  • Posts: 115
  • If in dout boost it out !
    • Email
  • My Ride: Mk5 golf gti (ko3) mods. Audi s3 8p intercooler,psi tuning 2.5' throttle pipe,updated diverted valve,revo oil catch can
Re: Car won't run !!!
« Reply #2 on: June 12, 2016, 10:19:11 am »
Lookes like I'll have to fine a fault code reader then haha

Offline bluebert92

  • Always Involved
  • ****
  • Thank You
  • -Given: 10
  • -Receive: 26
  • Posts: 292
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,100025.msg982250.html#msg982250
Re: Car won't run !!!
« Reply #3 on: June 12, 2016, 11:57:59 am »
Where are you based?

Offline Markis236

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 1
  • Posts: 115
  • If in dout boost it out !
    • Email
  • My Ride: Mk5 golf gti (ko3) mods. Audi s3 8p intercooler,psi tuning 2.5' throttle pipe,updated diverted valve,revo oil catch can
Re: Car won't run !!!
« Reply #4 on: June 12, 2016, 11:59:40 am »
Phoned a mate with a fault code reader and dealt all the fault and the car runs fine now ? Must remember the cad and stop the car from starting then

Offline slix

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 7
  • -Receive: 38
  • Posts: 634
  • Stage 1 ED30 Owner
Re: Car won't run !!!
« Reply #5 on: June 12, 2016, 12:08:56 pm »
Phoned a mate with a fault code reader and dealt all the fault and the car runs fine now ? Must remember the cad and stop the car from starting then

Don't think it works that way. It's just a stored code. Not a live thing. Must have been luck or leaving car turned off fixed it.
Stage "1.5" ED30 [330BHP] Rtech