Make a donation

Author Topic: Anyone changed to peron IC ?  (Read 2437 times)

Offline Madone

  • Always Involved
  • ****
  • Thank You
  • -Given: 8
  • -Receive: 27
  • Posts: 390
Anyone changed to peron IC ?
« on: July 17, 2016, 02:18:31 pm »
I currently have a airtec stage 1 cooler, essentially a upgraded S3 cooler. Has anyone moved from a after market cooler to a Peron and notice better temps ?, is it a worthy upgrade or realistscally not a difference that would be noticed from the airtec ?

Offline patpong_pete

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 9
  • Posts: 313
Re: Anyone changed to peron IC ?
« Reply #1 on: July 19, 2016, 04:33:28 pm »
Airtec do a stage 2 type
Peron New type meant to be very good
Welly Cooler massive but needs more time to fit and mess about

all 3 are good just up to you and your budget ?

Offline Madone

  • Always Involved
  • ****
  • Thank You
  • -Given: 8
  • -Receive: 27
  • Posts: 390
Re: Anyone changed to peron IC ?
« Reply #2 on: July 19, 2016, 07:01:45 pm »
Trying to work out if I should have gone stage 2 airtec in the first place  :laugh:, tbh unless it's hot like today not sure there will be a massive diff between the airtec I have and say a Peron ?. Has anyone seen any sort of comparison between coolers ?.

Offline MC71

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 413
  • -Receive: 427
  • Posts: 5198
  • Mk7 R
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,113185.0.html
Re: Anyone changed to peron IC ?
« Reply #3 on: July 19, 2016, 07:30:09 pm »
If you already have an Airtec (even the smaller one which is still great) then def don't get a Peron or Airtec 2 unless your chasing big numbers and every single ounze of extra flow helps.

Hard to compare unless a tuner had run the same car with same mods and swapped out the cooler. I know Niki's misses Eddy has/had a Peron, not sure what cooler was on board beforehand.

.                              

                    Build thread Stage 2+ Edition 30 ~~Clicky here~~

Offline Madone

  • Always Involved
  • ****
  • Thank You
  • -Given: 8
  • -Receive: 27
  • Posts: 390
Re: Anyone changed to peron IC ?
« Reply #4 on: July 19, 2016, 09:15:07 pm »
If you already have an Airtec (even the smaller one which is still great) then def don't get a Peron or Airtec 2 unless your chasing big numbers and every single ounze of extra flow helps.

Hard to compare unless a tuner had run the same car with same mods and swapped out the cooler. I know Niki's misses Eddy has/had a Peron, not sure what cooler was on board beforehand.

Thanks mate, makes sense. The airtec cooler I have works a treat and tbh I can't see how anything bigger could even fit !

Offline Tfsi_Mike

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 241
  • -Receive: 309
  • Posts: 10222
  • Go Large or Go Home
    • Tfsi Mikes Money Pit AKS / TTE / RTech St2+ Cupra
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,32721.msg402587.html#msg402587
Re: Anyone changed to peron IC ?
« Reply #5 on: July 19, 2016, 09:28:40 pm »

Offline Dan_FR

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 132
  • -Receive: 189
  • Posts: 1845
  • wait...what?
    • Email
Re: Anyone changed to peron IC ?
« Reply #6 on: July 20, 2016, 07:41:54 am »
All intercoolers will heatsoak massively with the weather we had yesterday unless you are doing high enough speeds for sufficient airflow.

I think my IAT peaked at 68 degrees C yesterday after being stuck in slow moving traffic with the aircon on full blast, covered around 1 mile in 30 minutes. It soon drops again when on the move and absolutely plummets to sub-ambient when the meth kicks in
TFSI... Revo Stage 2+... . WMI.... VCDS HEX + CAN, MPPS, VAG Commander & VAG tacho - South Wales

Offline AJP

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 392
  • -Receive: 316
  • Posts: 3212
Re: Anyone changed to peron IC ?
« Reply #7 on: July 20, 2016, 06:11:54 pm »
I think I'm right in saying the Stage 1 Airtec is better for a 2+ k03, whereas the Stage 2 Airtec and Peron are better for a 2+ k04 (or bigger) car.

As for charge temps over the last couple of days of 30deg+ ambient, it's really noticeable. Especially at Stage 2 with the oem cooler..! I've read conflicting reports about water meth, but it's definitely something I'm going to look into when I sort out cooling and a proper turbo.