Author Topic: door (Read 1693 times)

stuupnorth · « **on:** July 11, 2016, 05:49:00 pm »

hi all
this weekend I replaced the window regulator ie door skin off etc all went ok but
now I cant open the door from the outside or inside
any ideas?

TAPPY · « **Reply #1 on:** July 11, 2016, 05:55:28 pm »

I believe the little cable you clip into the handle you have pulled it to tight when refitting

stuupnorth · « **Reply #2 on:** July 11, 2016, 06:01:37 pm »

any idea how to solve the problem?

TAPPY · « **Reply #3 on:** July 11, 2016, 06:02:23 pm »

This bit in the pic.
Tricky but you will need to pull the outer handle about half way out roughly and use a small screwdriver to pop the cable / clip out and then open the door from inside then take out the lock cover out and re attach.

TAPPY · « **Reply #4 on:** July 11, 2016, 06:05:05 pm »

Let us know how you get on

stuupnorth · « **Reply #5 on:** July 11, 2016, 06:15:45 pm »

Many thanks mate
as soon as you mentioned the little cable
I opened the handle and released the cable so I could open the door and then readjusted the cable
sorted again many thanks

TAPPY · « **Reply #6 on:** July 11, 2016, 06:22:05 pm »

No worries mate I have seen it done loads of times and is a pita sometimes

Author Topic: door (Read 1693 times)

stuupnorth

door

TAPPY

Re: door

stuupnorth

Re: door

TAPPY

Re: door

TAPPY

Re: door

stuupnorth

Re: door

TAPPY

Re: door