MFSW Install Help/Confirmation

[oisinc]

I know this has been covered but I need to finally clear this up..

I have a 2009 gti (mk5)
Its a DSG with paddle shift.
I have the MSFW Buttons from Pashka (they have the module)

Are these a straight forward fit? does any foam need trimming under the blanks?
I have a retro fitter/coder and hes not sure if they fit without cutting foam etc...

Can anyone clear this up once and for all.. :))

TIA

[SI-R32]

No cutting, the blanks will unscrew via a T20 screw and the buttons replace the blanks, route the wires all done.

[RetroRaz]

Dsg steering wheels have cutouts already in place. No need for cutting things

Sent from my SM-G928F using Tapatalk

[oisinc]

Thanks Guys!

I read on another thread that the buttons do not need any coding?

[dronners]

Thanks Guys!

I read on another thread that the buttons do not need any coding?

they will need coding.. mine did on a 2008 car

[99hagued]

I did this mod the other month if your car has cruse control, highline display and dsg like mine it won't need coding. Here's some pics to give you a idea of what to expect.

[oisinc]

Thanks again for the replies..
Pics were great to see. :)

[spwd]

Didn't think I'd start another thread but do I just need the 2006 onwards buttons from pashka for instance with the module or can I buy that somewhere?

[mikezs]

Thanks again for the replies..
Pics were great to see. :)

Can I have the blanks once you're finished with them please? I'll cover postage :)