All Things Mk5 > How to Guides / Troubleshooting

Ipod adapter help

(1/3) > >>

Nasir:
Well I almost had it and now I think I know why the adapter didn't power up. Where does the brown wire go? I'll try and attach a picture





Where does that brown wire go? One of them was without a clip and I clipped the end onto the clip I got with it, assuming they clipped into each other.

SteveP:
Looks like someone has made up a "no cut" type loom to feed off of the main quadlock connector.

As from what I remember of installing one of these the loose wire just needs to be be connected to a suitable ground/earth connection.

Nasir:

--- Quote from: SteveP on January 23, 2010, 05:17:36 pm ---Looks like someone has made up a "no cut" type loom to feed off of the main quadlock connector.

As from what I remember of installing one of these the loose wire just needs to be be connected to a suitable ground/earth connection.

--- End quote ---

The quadlock connector comes out from the blue case. Do I pull one of the wires from the quadlock connector out? The manual doesn't make anything clear.

SteveP:
I can't be 100% sure it appears the loom has been modified.

Do you have a multimeter to check if the two connectors are joined?

Nasir:
No I don't have a multimeter. The unit was advertised as new and came sealed uswel. The manual shows something similar but I just can't work it out. http://www.mediafire.com/?bommpgdygjf

Navigation

[0] Message Index

[#] Next page