All Things Mk5 > How to Guides / Troubleshooting

HPFP Strip, Clean & Autotech Rebuild (Image Heavy)

<< < (2/2)

Aparoon:
I'm gonna give mine a go, or at least watch my old man doing it  :grin:

david_phillips95:
Decided to get the pump built back together tonight, took a few pictures as i went. Didnt take as many as i would have like but i was quite paranoid about getting any foreign paticles on the components during build.

 

Anyway here's a quick and simple write up:

Set the bench up again and covered with clean polythene which was all wiped down the IPA wipes to ensure cleanliness. All tools and equipment was also cleaned in the same manner.





All the parts were removed from the bags and placed on the table, all parts were given a final clean with IPA wipes prior to assembly



Close up of the Autotech Internals Packaged
http://i57.photobucket.com/albums/g234/david_phillips95/IMG_0858.jpg

The internals were removed from the box and placed on IPA wipes, these were wiped down with IPA wipes also, ignore the metal button at the top of the picture this is part of the OEM setup.



Pump partially assembled, ready for autotech internals


Autotech internals installed just the spring and retainer and collets to fit


Installation of Autotech Internals Complete



All boxed and ready to fit this week



If you follow the Autotech instructions and keep everything immaculate you wont have any issues. Sorry there isnt much detail but as the assembly is critical i was being extra careful so didnt get many photos taken.

 

Cheers Davie

Bogdanbd:
Very, very nice!
Any problems so far?

I expect mine to arrive within a week.

david_phillips95:
I have had the pump installed for almost 1000 miles now and havent had any issues. Loving the extra power  :grin:

Davie

Navigation

[0] Message Index

[*] Previous page