Which control module for mfsw

[mikezs]

Those are the lights you get when you disconnect the battery, just driving makes them clear normally.

If it doesn't clear you might have to do the steering angle adaption (like when you first installed the controller)

[axsweb]

Sorted the lights out. All controls working okay just the stupid menu button not working.


Sent from my iPad using Tapatalk

[ducman77]

Just jumping in here to send a big shoutout to @RetroRaz 
I used your YouTube video to great effect when I was retrofitting a MFSW to my MK5
Thanks a million for the video buddy

[RetroRaz]

Just jumping in here to send a big shoutout to @RetroRaz 
I used your YouTube video to great effect when I was retrofitting a MFSW to my MK5
Thanks a million for the video buddy

No worries buddy. YouTube recently disabled the video due to some racism being thrown at me for no reason. But it can be enabled again.

Sent from my SM-G928F using Tapatalk

[Broomy]

I think I’ve figured out I need a ch module to match highline cluster, mfsw & cc as my AF module is midline. Do I need the separate harness? (5K0971584C)

[mikezs]

I think I’ve figured out I need a ch module to match highline cluster, mfsw & cc as my AF module is midline. Do I need the separate harness? (5K0971584C)

You will if it didn't come with the MFSW and you don't have DSG

[Broomy]

I think I’ve figured out I need a ch module to match highline cluster, mfsw & cc as my AF module is midline. Do I need the separate harness? (5K0971584C)

You will if it didn't come with the MFSW and you don't have DSG

Perfect. Thanks a million 

[Octoparrot]

I believe that part number is for the mark 6. The part you need is 1K0971584C.

[RobC]

I believe that part number is for the mark 6. The part you need is 1K0971584C.

It works in the Mk5 as well. Its essentially a cross over that supports both LIN 1.3 & 2.0 and so is used when retrofitting later steering wheels but believe it still works with the Mk5 MFSW etc.

http://wiki.ross-tech.com/wiki/index.php/Steering_Wheel_Control_Module_Versions

Rob

[mikezs]

I believe that part number is for the mark 6. The part you need is 1K0971584C.

It works in the Mk5 as well. Its essentially a cross over that supports both LIN 1.3 & 2.0 and so is used when retrofitting later steering wheels but believe it still works with the Mk5 MFSW etc.

http://wiki.ross-tech.com/wiki/index.php/Steering_Wheel_Control_Module_Versions

Rob

It definitely does not fit, and I've got a mk6 harness if you'd like it for the cost of postage if you want to try it!

[RobC]

I believe that part number is for the mark 6. The part you need is 1K0971584C.

It works in the Mk5 as well. Its essentially a cross over that supports both LIN 1.3 & 2.0 and so is used when retrofitting later steering wheels but believe it still works with the Mk5 MFSW etc.

http://wiki.ross-tech.com/wiki/index.php/Steering_Wheel_Control_Module_Versions

Rob

It definitely does not fit, and I've got a mk6 harness if you'd like it for the cost of postage if you want to try it!

Apologies, I thought you were talking about the SWCM, not the harness. Ignore me! 

[mikezs]

I believe that part number is for the mark 6. The part you need is 1K0971584C.

It works in the Mk5 as well. Its essentially a cross over that supports both LIN 1.3 & 2.0 and so is used when retrofitting later steering wheels but believe it still works with the Mk5 MFSW etc.

http://wiki.ross-tech.com/wiki/index.php/Steering_Wheel_Control_Module_Versions

Rob

It definitely does not fit, and I've got a mk6 harness if you'd like it for the cost of postage if you want to try it!

Apologies, I thought you were talking about the SWCM, not the harness. Ignore me! 

Ah, yep. That CH module is the magic one that's cheap from china and supports highline mk5 and mk6. Defo need the Mk5 harness though, the connector plug for the MFSW controller doesn't quite reach!