Make a donation

Author Topic: RFD and clean inlet valves  (Read 1226 times)

Offline Mitch1980

  • Always Involved
  • ****
  • Thank You
  • -Given: 37
  • -Receive: 3
  • Posts: 53
RFD and clean inlet valves
« on: December 20, 2016, 09:14:59 pm »
Fellas thinking of doing the rf delete kit but as I'm there should do the inlet valves but what method do you do to clean ? Any help apretiated

Offline pudding

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 2
  • -Receive: 690
  • Posts: 8353
Re: RFD and clean inlet valves
« Reply #1 on: December 21, 2016, 09:36:39 am »
http://www.repairingproducts.co.uk/product/carbon-off-oven-carbon-remover-cleaner-spray-19oz/

https://www.amazon.co.uk/gp/product/B00BCY5ST6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Make sure the cylinder you are cleaning is at TDC to stop crud dropping down into the cylinder.

Spray the carbon off onto the valves, leave for an hour, spray more on, leave for 10 mins.....then get scrubbing!


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D