Author Topic: MFSW fitted now can't clear codes (Read 1597 times)

Newbieintown · « **on:** January 22, 2017, 05:29:30 pm »

Hi guys today I fitted a MFSW everything works fine with the wheel the buttons and cruise control. but I can't clear my dash lights. Am stuck have tried resetting the steering wheel angle sensor most of the day... Can't clear on VCDS either. Am using midline clocks, 1K0953549CH steering wheel control module, 1K0959653C slip ring (this was on my car before) any ideas guys?

rich83 · « **Reply #1 on:** January 22, 2017, 06:31:02 pm »

Have you done full lock left then full lock right? Still on?

Newbieintown · « **Reply #2 on:** January 22, 2017, 06:50:24 pm »

Yep did that through out the day, left it for a couple of hours and tried again. :-(((

RetroRaz · « **Reply #3 on:** January 22, 2017, 09:54:11 pm »

Replied back to your pm

mkmg76 · « **Reply #4 on:** January 25, 2017, 01:14:47 pm »

Have you driven it yet?

Newbieintown · « **Reply #5 on:** January 25, 2017, 05:31:27 pm »

All clear now thanks to @RetroRaz
Just a new light to deal with now ABS test mode.

Author Topic: MFSW fitted now can't clear codes (Read 1597 times)

Newbieintown

MFSW fitted now can't clear codes

rich83

Re: MFSW fitted now can't clear codes

Newbieintown

Re: MFSW fitted now can't clear codes

RetroRaz

Re: MFSW fitted now can't clear codes

mkmg76

Re: MFSW fitted now can't clear codes

Newbieintown

Re: MFSW fitted now can't clear codes