The power steering fault is incorrect settings or something. The horn doesn't work either?
My intention was swapping over from an AQ module to a CH as the cruise control doesn't work with AQ [I only found this out after I bought it].
I originally swapped over from my midline [factory fitted] swcm so I could make use of the mfsw buttons I bought. I'm very tempted to say sod it to the idea of mfsw and go back to my midline swcm - at least the cruise control was working with that.
I didn't save the scan at the time but from memory I think it was this code:
01309 - Power Steering Control Module (J500)
01309 - Power Steering Control Module (J500): Implausible Signal
Possible SymptomsMalfunction Indicator Light (MIL) active
Possible CausesWhen found in Brake Electronics (MK60)
Incorrect Steering Aid Characteristic Setting
Incorrect Steering Aid Warning Lamp Setting
Driver Steering Recommendation (DSR) in activated in Brake Electronics but not in the Steering Aid Control Module or vice versa.
Possible SolutionsWhen found in Brake Electronics (MK60)
Check Brake Electronics Coding
Check Steering Aid Characteristic Setting
Check Steering Aid Warning Lamp Setting
Check Driver Steering Recommendation (DSR) Setting
Which is the correct setting for the DSR and where do I find it in the swcm?
Bloody minefield!! and I've collected 3 modules now!!!