All Things Mk5 > How to Guides / Troubleshooting

EVOMS engine cover help needed, please....

<< < (3/5) > >>

RedRobin:

--- Quote from: Greenouse on February 01, 2010, 04:51:39 pm ---
That should look the business once you have finished arsin about with it RR!  :happy2:


--- End quote ---

.... :laugh:  Now you know why I don't do much DIY. Apart from limited knowledge about what I'm doing, I take a loooong time.

The EVOMS cover without a centre strip looks very WD (War Department) and plain but, to be fair, it has been designed to carry a centre strip - Well, half-designed as there are no slots for the tabs but the 'nose' is shaped for one.

Greeners:
I think they look great! Just can't justify the expense atm!  :happy2:

singh123:
Hi Robin

yes the ITG intake uses the side engine mount point to secure the intake, the way it was meant to be bolted was with the bolt coming into from the batter end and then the nut being tightened from the batter end, but because I couldn’t get my hard under the cover to do it that way I put the nut in from the engine side and the nut on the battery side, the mounting point o the ITG allowed for me to do this

I will take a picture for you tomorrow that will show this a bit better and more clearly

Yeah I have been looking on eBay for an S badge but couldn’t find anything, were did you get yours done from?

RedRobin:

--- Quote from: singh123 on February 01, 2010, 08:33:21 pm ---Hi Robin

yes the ITG intake uses the side engine mount point to secure the intake, the way it was meant to be bolted was with the bolt coming into from the batter end and then the nut being tightened from the batter end, but because I couldn’t get my hard under the cover to do it that way I put the nut in from the engine side and the nut on the battery side, the mounting point o the ITG allowed for me to do this

I will take a picture for you tomorrow that will show this a bit better and more clearly

Yeah I have been looking on eBay for an S badge but couldn’t find anything, were did you get yours done from?


--- End quote ---

....Yes, I don't know how anyone is able to manage to tighten anything from inside the EVOMS cover. Thanks for any pic.

The TTshop got my VW badge and I think it's from another VW vehicle. I suggest you ask a friendly Seat dealer if they know of such a part or even contact Seat UK (if such an organisation exits). You simply want a round Seat or Leon or Cupra badge sized anything between 60 to 70 mm diameter.

Have a look at these : - http://shop.ebay.co.uk/items/__seat+cupra+badge_W0QQ_dmdZ2?rvr_id=&crlp=1982245324_228459_228460&UA=M

singh123:
Hi Robin

I have taken some pictures sorry there not of best quality, i hope it makes it a bit clearer

Navigation

[0] Message Index

[#] Next page

[*] Previous page