Make a donation

Author Topic: Heating question (V158 potentiometer)  (Read 966 times)

Offline JGTTDI

  • Taking part
  • ***
  • Thank You
  • -Given: 1
  • -Receive: 3
  • Posts: 26
Heating question (V158 potentiometer)
« on: June 19, 2017, 09:22:12 am »
Hi everyone,

The passenger side heater vents blow only hot air. I have checked the faults and the V158 heater potentiometer is at fault. I have also tested this manually and found it to be faulty.

My question is do I need a new part with the matching part numbers or can I use the potentiometer with another part number? I know they might move differently etc but want to check first.

Thanks in advance.

Offline jason_rmh

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 69
  • -Receive: 81
  • Posts: 911
Re: Heating question (V158 potentiometer)
« Reply #1 on: June 19, 2017, 06:53:52 pm »
Probably best to get one that matches. There are a few that are physically the same, but have different cogs / Connectors.

Best to go for one the same to save any hassle.

I had the same dilemma replacing the recirculation flsp motor.

Jas

VCDS (Preston, Lancashire)