Update....
a mixed bag today. Visited young Mr Kerr at AKS (the usual 200 mile round trip, which I do even for a minor service...find someone good, STICK WITH THEM I say) and had fitted a Racingline R600 Intake, Turbo Tecnics Inlet pipe, Racingline Muffler Delete, GFB DV+ and changed the oil to some nice new Millers CFS nanodrive 5w40...all good. R600 is quiet as hell.....not like my old REVO CAI or ITG MAXOGEN days but that's cool and in combination with the other bits seems to give a smidge more (quicker) response on WOT but that could be a placebo effect....who knows. Should also add a few more ponnies to the stable!! Woohooo
Alas I didn't have the REVO stage1 map or REVO DSG map done today as we found a small (seems to be intermittent) leak from the coolant system, probably the water pump so as the car is under warranty I'll get that sorted first before any maps. A delay of a month or two but no rush as this is a long term project.
I've now a better/clearer idea of the direction I'm taking now re future mods, which Hybrid turbo, maps and and also which BBKs to consider for my needs.
I will add a few pics of the fitted mods (and my filthy dirty engine bay) once I take some!!
But for now, the mods......
Racingline R600 Intake...A link to their site (below) and description etc......
~~Clicky here~~Pic below shows where the intake draws air from. Whereas the OEM system only draws from one side the R600 does from both sides directing it to the filter....
Turbo Technics Inlet Pipe..Description (sounds good if nothing else
).....
Free the flow.
The Turbo Technics Large Bore Intake hose for the MQB 2.0TFSI equipped vehicles such as the MK7 Golf GTI, Golf R, 8V S3, Leon Cupra & Octavia VRS replaces the restrictive factory hose.
The Problem:
The factory intake hose has a restrictive diameter and restrictive turbo inlet. Resulting in restricted performance.
The Remedy:
The Turbo Technics Large Bore Intake Hose features a larger diameter from the air intake down to the turbo inlet, with a specially machined from billet bellmouth with a venturi type funnel design to increase airflow velocity into the turbocharger inlet. All of these features result in proven and tangible performance gains.
Simple and quick to install this intake hose will greatly improve the driving experience of any 2.0TFSI equipped MQB car.
Advantages:
Proven Power & Torque Gains on Stock & Remapped Cars - Late 2015 DSG Golf R Stage 1 APR Gained 13TQ & 12HP @ 5000RPM
Less Turbo Lag
Compliments any performance aftermarket intake, but also fits on the stock intake. Pic from interweb......
Racingline Turbo Muffler Delete.. Link to their site....
~~Clicky here~~Thier description.....
The VWR Turbo Muffler Delete is a simple and cost-effective upgrade for any MQB-platform car using the 1.8T and 2.0T EA888 TSI engines with the IHI turbo.
Our VWR Turbo Muffler Delete is a sleek single billet design which replaces the restrictive, power-robbing OEM part with a smooth, turbulence free air path exiting the turbo.
What does it do? The standard part is located on the outlet of the turbo compressor and is simply designed to reduce engine bay acoustics. Whilst it subdues the harmonic noises generated by the turbo, it also adds in disruptive turbulence to the airflow right where you don't want it.
By replacing the standard part with our VWR Turbo Muffler Delete, you’ll replace this restrictive section with a straight, uninterrupted piece. The result: better boost response giving a little more power, all the while being able to actually hear your turbo working.GFB DV+...Link to their site below with full description etc... (Lot of waffle but interesting)
~~Clicky here~~All for now.