A while ago a friend messed up my ECU by trying to code me a new key on the cheap... Needless to say it messed a fair few things up but anyway we got the ECU working again and now I have an issue where the ABS & ESP lights stay on.
I've already changed the steering controller and the squib thing that goes over the steering spline, neither of those worked.
My brakes work fine, but I can tell I don't have ABS or ESP
-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 1K0-907-379-MK60-F.lbl
Part No SW: 1K0 907 379 Q HW: 1K0 907 379 Q
Component: ESP FRONT MK60 0102
Revision: 00T12001
Coding: 0004738
Shop #: WSC 01206 210 45725
VCID: 40889B4213188341A9-8014
4 Faults Found:
00778 - Steering Angle Sensor (G85)
014 - Defective - Intermittent
00778 - Steering Angle Sensor (G85)
005 - No or Incorrect Basic Setting / Adaptation - Intermittent
01044 - Control Module Incorrectly Coded
008 - Implausible Signal
01309 - Power Steering Control Module (J500)
004 - No Signal/Communication
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Address 44: Steering Assist Labels: 1Kx-909-14x-44.clb
Part No: 1K2 909 144 H
Component: EPS_ZFLS Kl.2 1502
Shop #: WSC 00000 000 00000
VCID: 316ECE86A8B21AC956-8064
3 Faults Found:
00778 - Steering Angle Sensor (G85)
014 - Defective - Intermittent
02546 - Steering Limit Stop
005 - No or Incorrect Basic Setting / Adaptation
Freeze Frame:
Mileage: 640 km
Temperature: 38.0°C
Voltage: 13.90 V
Voltage: 13.70 V
00778 - Steering Angle Sensor (G85)
000 - -
Freeze Frame:
-------------------------------------------------------------------------------
End-------------------------(Elapsed Time: 01:41)--------------------------
