Make a donation

Author Topic: Rns210 into mk5 replacing a rcd300  (Read 1273 times)

Offline Dave_d

  • Always Involved
  • ****
  • Thank You
  • -Given: 12
  • -Receive: 5
  • Posts: 105
Rns210 into mk5 replacing a rcd300
« on: August 03, 2017, 06:01:13 am »
Hi guys, has anyone had any experience of putting one of thes in a mk5 t replace the rcd300 ? Previous owner had sandpaper hands it seems and I'd like to put a jem stereo in its place that's better condition with aux etc built into it

Offline Pashka

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 4
  • -Receive: 33
  • Posts: 624
    • Email
Re: Rns210 into mk5 replacing a rcd300
« Reply #1 on: August 08, 2017, 11:07:44 am »
You will need arial adapter and change the can gateway to avoid battery drain if your car is <07, otherwise plug and play.
06 1.9 TDI Owner. Retrofits: Bixenons, Drls, Full GT/GTI exterior, RNS510+MDI+Premium Bluetooth+RVC+OPS, Full Fis, MFSW, Cruise control, TPMS, Polar Fis, Boot pop up and more.. :)
Coding, diagnostic and retrofits in Leeds
Pre coded Can Gateways for battery drain issues with RNS510 and similar headunits
Premium Bluetooth modules/kit
RNS510 Service - codes, maps/firmware updates
Latest V8 West EU maps update service for RNS315