Make a donation

Author Topic: Anyone around West Yorkshire that will code Canbus Gateway?? RESOLVED  (Read 1981 times)

Offline Raj2212

  • Always Involved
  • ****
  • Thank You
  • -Given: 75
  • -Receive: 20
  • Posts: 163
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,115142.0.html
Have the battery drain issue. Anyone local that has vcds to code the newer revision one. Am I correct in saying the L and above is  the one to go for. Could either go for one preceded at £90 or get one from eBay uncoded for £30-40.

Many Thanks
« Last Edit: December 14, 2017, 09:28:43 pm by Raj2212 »

Offline MIJ_JAGGER

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 103
  • -Receive: 78
  • Posts: 765

Offline r5gtt

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 342
  • -Receive: 334
  • Posts: 5586
Re: Anyone around West Yorkshire that will code Canbus Gateway??
« Reply #2 on: December 11, 2017, 01:26:19 am »
Have the battery drain issue. Anyone local that has vcds to code the newer revision one. Am I correct in saying the L and above is  the one to go for. Could either go for one preceded at £90 or get one from eBay uncoded for £30-40.

Many Thanks
Just do the fuse mod in engine bay

IMG_2913" border="0
« Last Edit: December 11, 2017, 01:36:28 am by r5gtt »

Offline Raj2212

  • Always Involved
  • ****
  • Thank You
  • -Given: 75
  • -Receive: 20
  • Posts: 163
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,115142.0.html
Re: Anyone around West Yorkshire that will code Canbus Gateway?? RESOLVED
« Reply #3 on: December 11, 2017, 11:03:31 am »
Thanks for the response guys. And @MIJ_JAGGER , thanks for the canbus mate. Gonna go down the route of getting it coded. @r5gtt Thanks for the guide pal. I would've done this but don't trust my electrical skills, plus I have to get my keys coded back to my car due to dropping it like an idiot. it only works when I'm a foot away.

Found someone in Manchester that will code the keys, code the canbus and put a few extras other mods all in at £30. (Says he can do something with my headlights) Closest person I found so far. Had a look at the VCDS page but noresponse from people from Leeds or Bradford yet.  :happy2: :happy2:

Offline r5gtt

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 342
  • -Receive: 334
  • Posts: 5586
Re: Anyone around West Yorkshire that will code Canbus Gateway??
« Reply #4 on: December 11, 2017, 11:10:38 am »
No worries, hope you get all your issues resolved  :happy2:

Offline Pashka

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 4
  • -Receive: 33
  • Posts: 624
    • Email
Re: Anyone around West Yorkshire that will code Canbus Gateway?? RESOLVED
« Reply #5 on: December 11, 2017, 10:06:30 pm »
Thanks for the response guys. And @MIJ_JAGGER , thanks for the canbus mate. Gonna go down the route of getting it coded. @r5gtt Thanks for the guide pal. I would've done this but don't trust my electrical skills, plus I have to get my keys coded back to my car due to dropping it like an idiot. it only works when I'm a foot away.

Found someone in Manchester that will code the keys, code the canbus and put a few extras other mods all in at £30. (Says he can do something with my headlights) Closest person I found so far. Had a look at the VCDS page but noresponse from people from Leeds or Bradford yet.  :happy2: :happy2:
I'll do it for 20 quids in Leeds lol.
06 1.9 TDI Owner. Retrofits: Bixenons, Drls, Full GT/GTI exterior, RNS510+MDI+Premium Bluetooth+RVC+OPS, Full Fis, MFSW, Cruise control, TPMS, Polar Fis, Boot pop up and more.. :)
Coding, diagnostic and retrofits in Leeds
Pre coded Can Gateways for battery drain issues with RNS510 and similar headunits
Premium Bluetooth modules/kit
RNS510 Service - codes, maps/firmware updates
Latest V8 West EU maps update service for RNS315

Offline Raj2212

  • Always Involved
  • ****
  • Thank You
  • -Given: 75
  • -Receive: 20
  • Posts: 163
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,115142.0.html
Re: Anyone around West Yorkshire that will code Canbus Gateway?? RESOLVED
« Reply #6 on: December 12, 2017, 01:16:27 pm »
Thanks for the response guys. And @MIJ_JAGGER , thanks for the canbus mate. Gonna go down the route of getting it coded. @r5gtt Thanks for the guide pal. I would've done this but don't trust my electrical skills, plus I have to get my keys coded back to my car due to dropping it like an idiot. it only works when I'm a foot away.

Found someone in Manchester that will code the keys, code the canbus and put a few extras other mods all in at £30. (Says he can do something with my headlights) Closest person I found so far. Had a look at the VCDS page but noresponse from people from Leeds or Bradford yet.  :happy2: :happy2:
I'll do it for 20 quids in Leeds lol.

Topman  :happy2: PM'd

Offline Raj2212

  • Always Involved
  • ****
  • Thank You
  • -Given: 75
  • -Receive: 20
  • Posts: 163
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,115142.0.html
Re: Anyone around West Yorkshire that will code Canbus Gateway??
« Reply #7 on: December 14, 2017, 09:28:25 pm »
All sorted.  :grin:  :grin: :grin:

@MIJ_JAGGER Thanks for the Canbus  :happy2:
@Pashka Thanks for coding it and adding the extra mods. Legend  :happy2:

Turned out I had revision F. Now upgraded to Q

No more waking up to a dead battery.  :drinking:

Offline MIJ_JAGGER

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 103
  • -Receive: 78
  • Posts: 765
Re: Anyone around West Yorkshire that will code Canbus Gateway?? RESOLVED
« Reply #8 on: December 14, 2017, 10:48:12 pm »
Pleasure matey, glad you got it sorted