Make a donation

Author Topic: Changing lower control arm (Passenger Side)  (Read 5207 times)

BleckBulletGTI

  • Guest
Changing lower control arm (Passenger Side)
« on: July 08, 2017, 10:18:36 pm »
Hi All.

Today I decided to change my front lower control bushings.  Drivers side was easy but on the passenger side the gearbox is in the way and I cannot remove the bolt.  Any ideas how I can get around this?

Do I have to drop the sub frame or something like that? Looking for the easiest way out.

Any assistance would be appreciated.
 

Offline exodus_ste

  • Always Involved
  • ****
  • Thank You
  • -Given: 14
  • -Receive: 11
  • Posts: 206
    • Email
Re: Changing lower control arm (Passenger Side)
« Reply #1 on: July 19, 2017, 02:10:22 pm »
You have to remove the lower dogbone mounting bolt which allows the engine to rock out of the way. Manual or DSG?

Offline Shoduchi

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 220
  • -Receive: 429
  • Posts: 4173
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,95592.msg952042.html
Re: Changing lower control arm (Passenger Side)
« Reply #2 on: July 19, 2017, 02:13:27 pm »
DSG version will need the gearbox mounts bolts removed and the box lifted with a jack.

Offline acko2204

  • Always Involved
  • ****
  • Thank You
  • -Given: 19
  • -Receive: 1
  • Posts: 101
    • Email
Re: Changing lower control arm (Passenger Side)
« Reply #3 on: December 10, 2017, 02:30:55 pm »
I’ve had problems removing my front control arm front bush bolt, Offside was easy but nearside WOW it’s tight, I’ve managed to get it turned and out about 10mm but it’s still not budging any further!
My GTi is manual and plenty of room away from  gearbox!
Wondered if anyone else had same problem removing this bolt that’s all

Offline pudding

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 2
  • -Receive: 689
  • Posts: 8353
Re: Changing lower control arm (Passenger Side)
« Reply #4 on: December 11, 2017, 01:03:52 pm »
Keep winding the bolt in and out with lots of penetrating oil in between each attempt.  Everyone loves a good bit of penetration eh?

The problem is the exposed portion of the bolt gets crusted up and binds in the threads when you undo it.   Just be careful you don't snap the bolt as that will seriously ruin your day.

Failing that, a good bit heat always works. 


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D

Offline r5gtt

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 342
  • -Receive: 334
  • Posts: 5586
Re: Changing lower control arm (Passenger Side)
« Reply #5 on: December 11, 2017, 01:42:43 pm »
As mentioned above, you WILL need to remove gearbox mount bolts and jack the box and engine up to get clearance for that particular bolt as I've done this many times  :signLOL: and it's not fun when you have to remove the CAI kit each time  :doh: good luck

Offline acko2204

  • Always Involved
  • ****
  • Thank You
  • -Given: 19
  • -Receive: 1
  • Posts: 101
    • Email
Re: Changing lower control arm (Passenger Side)
« Reply #6 on: December 11, 2017, 09:10:00 pm »
I really dont want this bolt snapping like you say  :doh: as you can imagine!! I see what you mean about taking the gearbox mount bolts out and lifting box/engine for clearence.
And did try backing in & out with said bolt & lots of penetrating fluid (normfest stuff 👍🏼) always went back into thread nice and easy but a bugger  when backing back out again, I’m literally nearly clear of back wishbone bracket threads as can see back end of the said bolt then hopefully will fly out #gulp
This car seems to be beating me at every chance haha

Offline acko2204

  • Always Involved
  • ****
  • Thank You
  • -Given: 19
  • -Receive: 1
  • Posts: 101
    • Email
Re: Changing lower control arm (Passenger Side)
« Reply #7 on: December 11, 2017, 09:13:35 pm »
👊🏼👊🏼👊🏼  screw you Golf GTi 👊🏼👊🏼👊🏼 I won’t be beat  :ashamed:

Offline pudding

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 2
  • -Receive: 689
  • Posts: 8353
Re: Changing lower control arm (Passenger Side)
« Reply #8 on: December 12, 2017, 09:49:11 am »
Get a propane torch from B&Q and roast that f'cker.  It will back right out then  :happy2:


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D

Offline acko2204

  • Always Involved
  • ****
  • Thank You
  • -Given: 19
  • -Receive: 1
  • Posts: 101
    • Email
Re: Changing lower control arm (Passenger Side)
« Reply #9 on: December 30, 2017, 10:32:01 pm »
Forgot to update..Had to concede & ended up bolting everything back up on the near side then limped it to a local garage who rebuilt the NSF for me (balljoint, alloy Passat arm & console bush)